Spray Guns | Cup Systems | Breathing Protection | Air Filtration | Accessories Technical Documentation

SATA 2K mix Mixing and Dosing System In the past, a large variety of materials requiring different hardeners with differing mixing ratios limited the efficient use of mixing and dosing systems in paint shops. On top of that, high initial investment costs for the installation of complex automated mixing systems presented a further obstacle. Further technical enhancements of paint systems, especially less complex mixing ratios and the reduction of required hardener versions, e.g. for clearcoats, now allow paint shops to use a 2-component mixing and dosing system efficiently, taking process security...

Technical components Dosing cylinder The system is supplied with a pre-set mixing ratio of 3:1. Repositioning the dosing cylinder for the hardener, it can be converted to a mixing ratio of 2:1. Alternative option: system with 4:1. Suction and circulation hoses Operating mode Prior to mixing paint, the system must be bled. To achieve this, the paint components (material and hardener) have to be circulated through the hoses and dosage cylinders until all air bubbles have been removed. By switching the lever on the mixing unit from They extract the material components from their original containers....

Technical Details Version SATA 2K mix W wall-mounting version Mixing ratios Versions and Article Numbers SATA 2K mix system 3:1/2:1 Scope of Supply: • Bottle of MESAMOL oil • Spray bottle • 5x splash guard foils • 10x container sealing lids • Wall mounting kit Complementary scope of delivery: • Trolley • Mounting kit Accessories Trolley kit for retrofitting SATA 2K mix W 250 ml glass cylinder to convert from 4:1 to 3:1/2:1 100 ml glass cylinder to convert from 3:1/2:1 to 4:1 Set of 57 SATA RPS 0.6 l 125 µm flat sieve Set of 57 SATA RPS 0,6 l 200 µm plug-in sieve Set of 40 SATA RPS 0.9 l 125 µm...