SX200 hpm PULSAR
1Pages

Repeatability below one micron The latest SARIX precision electrode col- peatable holding of the electrode of 30 In production the achievable runout of the electrode is less than 1 micron and remains constant even when the collet is changed or the electrode is re-feed wi- The collet design integrates the possibility to easily adjust the eccentricity of the electrode position and the axial tilt of the New precision manual guide holder device Even if the automation capabilities of the machine tools are increasing continuou- sly, high precision manual setup systems are still highly required for medium and low volume production cases. The latest manual guide holder offers user-friendly height guide positioning from top to bottom of the work piece kee- ping the perfect centering setup. The integrated retractable device leaves the quick access for the operator of the working area and the work piece under PG-S-M manual height adjustable guide holder Deeper and highly precise The best high precision deep hole drilling technology for the extreme deepest and smallest hole. Perfect deep hole drilling motion control specially developed for the carbide drilling needs. The astonishing results obtained by the combination of a "play free" guide rea- ching ratio up to 150 times depth/diameter. Micro EDM pulses controlled by the SX- MPS and SX-MFPS generator combined with a non contact electrode guiding. SX-MDH high precision deep hole drilling device The new PULSAR machines integrates now the high quality 12" color touch screen in an ergonomic and adjustable command panel. The user friendly overview covers the machining process operation. Maintenance control and machine status are displayed on several part windows Log-file and part program machining log are on direct access by Ethernet or USB Touchscreen control unit with joystick comand handbox POSITIONING PRECISION ± 2.0 um, Resolution = 0.1 |jm AXIS FEED RATE TABLE SIZE and LOAD POWER SUPPLY DIELECRIC UNIT Deionized water or oil dielectric unit HIGH PRESSURE FLUSHING 70 bar through electrode tube *SX200 AERO MACHINE CONFIGURATION INDEXING and TILTING AXIS A = -157+1 15°, B = 360° AXIS FEED RATE A/B=157sec