*mydirectindustry

SGC-120

1 / 2 PagesView full catalog

SGC-120

Product catalog summary

SGC-120: The New Standard in Super Heavy Lifting

Specifications:

The SGC-120 crane is designed according to American and European crane standards and is CE certified.
It features a power train with full redundancy and a load moment of 120,000 ton-meters (885,073,200 lbf*ft).
The lifting capacity is 3,200 tons at 30 meters and over 1,000 tons at 80 meters.
The hook block weight is 105 tons with multiple reeving combinations possible.

Design and Footprint:

The crane's ring design allows for compactness and stability, enabling operation in confined areas with minimal site impact.
It includes two slewing rings with diameters of 28,424 mm (inner) and 38,348 mm (outer).
Load spreading mats have an outside diameter of 43,600 mm.
The ballast consists of 36 reinforced 40 ft containers filled with locally sourced material, totaling up to 3,600 tons.

Ground Bearing Pressures:

The crane requires no special ground preparations due to low ground bearing pressures of 20 t/m² (2.05 t/ft²).
This is achieved through a unique design using two support rings, equally loaded bogies, and large load spreading mats.

On-Site Flexibility:

Equipped with reliable hydraulic winches with a high single line pull of 600 kN (135,000 lbf) and a line speed of 20 m/min (65.6 ft/min).
Features 6 winches with redundant encoder synchronization, allowing full capacity lifting without alternative systems.
Operational wind speeds up to 22.4 m/s (50.1 mph) and controlled slew operation with full axis synchronization.

Transportation:

The SGC-120 can be transported in standard shipping containers, approximately 135 containers for the standard main boom configuration.

Versatility:

Capable of lifting modules, PAR, PAU, FPSOs, and operations in chemical, power, and nuclear plants.
Supports circular slew operations and straight moves with load in hook.

Capacity Charts:

The capacity chart for the main boom shows lifting capacities at various radii, with configurations including 88.7 m MB, 118.0 m MB, and 130.0 m MB.
The main boom plus light duty jib configuration (130 m MB + 89.7 m LDJ) is also detailed.

Catalog excerpts

www.sarens.com - [email protected] SGC-120: the new standard in super heavy lifting SGC-120: reliable heavy lifting machine with high load moment SGC-120: limited footprint SGC-120: low ground bearing pressures SGC-120: on site flexibility SGC-120: flexible worldwide transportation SGC-120: versatile lifting machine

Open the catalog to page 1

www.sarens.com - [email protected] Capacity chart SGC-120 Main Boom 3500,0 Radius ( meters ) Capacity chart SGC-120 Main Boom + Light Duty Jib 350,0 130 m MB + 89,7 m LDJ 300,0 Radius ( meters ) SGC-120: the new standard in super heavy lifting SGC-120: reliable heavy lifting machine with high load moment Ballast: • The ballast of the crane consists of 36 special reinforced 40 ft containers filled with locally sourced material (up to 3.600 T ballast) • Crane design according to American and European crane standards • CE certified • The crane’s power train consists SGC-120: LOW GROUND BEARING of...

Open the catalog to page 2

All Sarens Group catalogs and technical brochures

Archived catalogs

SARENS TOWER CRANES 2021
2 Pages
2013 Self-Propelled Modular Trailers
2 Pages