Sartower
16Pages

SARTOWER LIFTING SYSTEM nothing too heavy, nothing too high

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen General The SARENS PUSH UP lifting system is developed as an alternative lifting system towards the actual high capacity lifting devices such as cranes. The system is used for lifting projects where the requirements cannot be fulfilled with the cranes. This requirement can be environmental and/or lifting height and/or lifting capacity. The SARENS PUSH UP has following main features Lifting operation 100% controlled from ground level No mechanical, electrical, hydraulical and electronical parts above the base level which...

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Working principle 3

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen 4

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Capacity Each base (bottom part tower) is dimensioned for a 1000 SWL. This means a pair of two towers does have a lifting capacity of 2000 tonnes. Each lifting operation needs to be carefully engineered in relation to tower height, bracings and/or stay wires and environmental conditions in other to determine the actual lifting capacity of the system. The capacity is function of the horizontal loading ( both transversal and longitudinal ) in the lifting towers. Example of capacities (not to use for comparison): For a set...

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Detailed description SARTOWER The SARTOWER is built up out of following main parts : • Base built up out of 2 HEB1000 beams and equipped with the main lifting cylinders and equalising jacks • Tower elements 2,4 x 2,4 x 6m ( masts ) • Pistons • Yoke • Hydraulic system • Electronic control system • Stay wires and bracings Sartower base The base is built up out of 2x HEB1000 of 6 m length. As all vertical load due to the lifted object is concentrated in the pistons – guide in the front panel of the towers is the base...

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Tower elements (masts) The dimensions of the tower elements are 6,050 x 2,450 x 2,6 m. During assembly the tower elements are assembled on top of each other and connected by means of a bolt connection in the front panel and a bolt or pin connection in the back panel. A mast of 6050 mm is built up out of 4 vertical members which are braced by means of diagonals and K bracings.The back panel vertical members are RHS 250 x 12,5 sections and the front panel vertical are the piston guides. All diagonals and braces are RHS...

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Blocking pistons The pistons are massive blocks which are inserted progressively one after the other and stacked on top of each other during a lifting operation (the load is pushed up by these blocks). Each lifting piston has a height 500 mm with very small tolerances. The pistons are stored in a frame which is easy picked up with a forklift. 8

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Yoke beam The yoke beam is a small lifting beam that is supported at both ends by the pistons and located in the guide. The yoke beam is a box girder capable of handling point loads of 1000 tonnes. Hydraulic system The hydraulic system is installed in the base and the powerpacks. The powerpacks are equipped with all components to provide the hydraulic power and the base has all elements related to the lifting, equalising jacks and feeding of pistons. • Hose and pipes: All the hydraulic hoses in the system are made out...

SARTOWER 4000TON Kenmerken Caracteristiques • Specifications Kennzeichnen Equalising jacks ( 8 in each base ): The equalising jacks are standard single action Enerpac jacks with a capacity of 250 tonnes at 700 bar – when the towers are maximally loaded ( 1000 tonnes ) the pressure in these jacks is maximal 350 bar • Powerpack (HPU): On Each Sartower a powerpack is built up around the hydraulic tank and features all 4 pumps of the lifting system. The required EL power is 2x 125 Amp – 50 Hz 380/400 V. The main system working pressure is 350 Bar. On the powerpack. Each HPU contains a control...

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Control system The control system is integrated in each base. The bases are interconnected by means of a data communication cable. The operation is controlled by the master PLC and following information is represented on the screen of the master PLC during the lifting operation: o Lifting height o Load in each lifting cylinder o Piston installation o Position of locking plates System stay wires / bracings A system of bracings and/or stay wires is used to stabilise the towers. The bracings / stays can be connected to the...

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen REFERENCE PROJECTS : Grane Project – Lifting Module D30 : The D30 module ( height 80 m – 1400 tonnes) is lifted by the SARTOWER up to a height of 22 m and skidded on top of the D40 module. • Lifting height = 22 m • Lifted weight = 1400 t + lifting beams 180 t • Environmental conditions Lifting : 10 m/s Stop : 23 m/s Erecting: 45 m/s 12

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Grane Project – Lifting Module D10 : Four towers of the SARTOWER are used to lift the upper part of module D10 of the GRANE project. The lifted weight is around 1500 tonnes and the module is lifted to a height of 44 m to facilitate installation of the bottom part by means of our hydraulic trailers. • Lifting height = 44 m • Lifted weight = 1545 t + lifting beams 150 t • Environmental conditions Lifting : 10 m/s Stop : 23 m/s Erecting: 45 m/s 13

SARTOWER 4000TON Kenmerken Caracteristiques Specifications Kennzeichnen Hundhammerfjellet project - lifting of a 3MW windturbine • Lifting height = 90 m • Lifted weight = 560 t + lifting beams 100 t • Environmental conditions Lifting : 15 m/s Stop : 32 m/s Erecting: 56 m/s 14