1. Catalogs
  2. SAPEM
  3. fixed semi-lifting beam SVS

fixed semi-lifting beam SVS

fixed semi-lifting beam SVS

Product catalog summary
Specifications:
The fixed semi-lifting beam SVS has a safety coefficient of 6. It complies with the NF EN 13155 standard, ensuring adherence to general characteristics and construction rules. The equipment meets the essential requirements of the European Directive 2006/42/CE and is supplied with a 'CE' certificate of conformity.
Testing and Customization:
Upon request, the beam can be tested at twice the nominal load by an approved laboratory. Customization options include beams equipped with hooks for sling angles up to 120° as per technical note 19847A, special models with adjustable spread, and a central hook for crane use without removing the beam.
Usage Instructions:
Usage and restrictions are detailed in instruction note NI 10059.
Technical Data:
The document provides a table with specifications for different models, including Safe Working Load (SWL), spread, dimensions (C, R, S, H, D), mass, and SAPEM code. For example, a model with a SWL of 1,000 kg has a spread of 1,000 mm, dimensions of 140 mm (C), 70 mm (R), 900 mm (S), 17 mm (H), 30 mm (D), and a mass of 30 kg, with SAPEM code 522A.
Contact Information:
For further inquiries, contact SAPEM at 45, rue Maurice Berteaux, 78600 Le Mesnil-le-Roi, via phone at +33 1 30 86 55 55, fax at +33 1 39 13 63 02, or email at [email protected].
See more

Catalog excerpts

fixed semi-lifting beam SVS-1

Standard NF EN 13155 : all our lifting beams meet the requirements of the above mentionned standard (general caracteristics, rules of construction). On request, beams equiped with hooks having a higher capacity in order to allow sling angles up to 120°, according to technical note 19847A. Equipment meeting the essential requirements of European Directive 2006/42/CE. Supplied with “CE” certificate of conformity. On request, with a central hook, allowing normal use of crane without removing the lifting beam Use and restrictions of use according to the instructions note NI 10059 45, rue Maurice Berteaux ml ■■ Tel. :+33 1 30 86 55 55 www.sapem-sa.com E-mail : [email protected]

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.