Specifications:
The fixed lifting beam has a safety coefficient of 6. It can be tested at twice the nominal load by an approved laboratory upon request. The beam features a double central beam design forming a box.

Standards and Compliance:
The lifting beams comply with the NF EN 13155 standard, which covers general characteristics and construction rules. They also meet the essential requirements of the European Directive 2006/42/CE and are supplied with a 'CE' certificate of conformity.

Usage and Restrictions:
Usage must adhere to the instructions in note NI 10059. Special models and capacities are available upon request. A central hook can be added on request to allow normal crane use without removing the lifting beam.

Contact Information:
Address: 45, rue Maurice Berteaux, 78600 Le Mesnil-le-Roi
Website: www.sapem-sa.com
Phone: +33 1 30 86 55 55
Fax: +33 1 39 13 63 02
Email: [email protected]

Technical Data:

SWL (kg)	Spreads C x E (mm)	R (mm)	S (mm)	H (mm)	D (mm)	Mass (kg)	SAPEM Code
1,000	1,000 x 260	215	150	480	22	35	534A
1,500 x 260			500		55		534B
2,000	1,000 x 300		520		22	55	534C
1,500 x 300			540		75		534D
2,000 x 300		290	610		100		534E
3,000	1,000 x 350	215		540	24	65	534F
1,500 x 350			580		100		534G
2,000 x 350		290	680		135		534H
3,000 x 350		390	820		200		534J
4,000	1,000 x 350	215		610	26	75	534K
5,000	1,000 x 400		630		26	90	534L
1,500 x 400			670		140		534M
2,000 x 400		290	760		160		534N
3,000 x 400		390	900		290		534P