CLAMPING SYSTEMS STANDARD
8Pages

CLAMPING SYSTEMS STANDARD stabilised adjustable fork page 39 horizontal plate clamp horizontal plate clamp compact plate clamp page 42 round clamp LVR page 43 girder clamp LVP page 43 Engineering All forces Designed for intensive use Complies with European Directive 2006/42/EC

CLAMPING SYSTEMS SPECIAL

Technical data sheets 45, rue Maurice Berteaux 78600 Le Mesnil-le-Roi www.sapem-sa.com

Stabilised adjustable fork Safety coefficient : 6 Special models and capacity (force) on request. SAPEM code SAPEM code Special models and capacity (force) on request. Equipment meeting the essential requirements of European Directive 2006/42/CE. Supplied with “CE” certificate of conformity. 45, rue Maurice Berteaux 78600 Le Mesnil-le-Roi www.sapem-sa.com

PLR type clamp for intensive use Very large capacity Chain class 8 (CEN TC 168) Coefficien of use : clamp 5 chain 4 All length « L » and all forces on request PLR type horizontal plate clamp for intensive use Mass of add SAPEM meter code kg Coefficien of use : clamp 5 chain 4 All length « L » and all forces on request Very large capacity Equipment meeting the essential requirements of European Directive 2006/42/CE. Supplied with “CE” certificate of conformity. 45, rue Maurice Berteaux 78600 Le Mesnil-le-Roi www.sapem-sa.com

LJR type horizontal plate clamp with chain Very large capacity SWL of 2 clamps Mass according to angle ô Mass of add of the 2 sides, kg SAPEM kg meter code kg 60° 90° 120° Chain class 8 (CEN TC 168) Coefficien of use : clamp 5 chain 4 All length « L » and all forces on request LJR type horizontal plate clamp for intensive use with cable SWL of 2 clamps A B C e 45° mm mm mm mm kg 1 000 2 000 3 000 5 000 7 000 SWL of 2 clamps Mass according to angle ô Mass of add of the 2 sides, kg SAPEM kg meter code kg 60° 90° 120° Very large capacity Chain class 8 (CEN TC 168) Coefficien of use : clamp 5...

Compact plate clamp Code 1902 to 1909 B Meets the essential requirements of the standard NF EN 13155 ALL POSITIONS PLATE CLAMP SWL On request : test at twice the nominal load, by an approved lab A Special dimensions B and C on request Cam pull back with spring Cam release with built in press button. (Code 1902,1904 and 1905) Plate thickness capacity E Note : this plate clamp is designed for plates with a hardness less than 110dN/mm2 (330 HB). Higher loads and thickness capacities on request. Plate thickness capacity E mm Equipment meeting the essential requirements of European Directive...

LVR type round clamp SAPEM code Safety coefficient : 6 Special models and capacity (force) on request. Maximum mass of a steel bar of 6 m, depending on diameter : 50 à 100 mm : 500 kg 100 à 150 mm : 1000 kg LVP type girder clamp and rail clamp type LVP SWL kg Maximum H capacity closed open P mm mm mm SAPEM code Safety coefficient : 6 Special models and capacity (force) on request. Equipment meeting the essential requirements of European Directive 2006/42/CE. Supplied with “CE” certificate of conformity. 45, rue Maurice Berteaux 78600 Le Mesnil-le-Roi www.sapem-sa.com