*mydirectindustry

V7

Product catalog summary

Overview: This document provides technical specifications and features of the GACHOT® Ball Valves manufactured by SAPAG VALVES, a French industrial valve manufacturer. The document outlines the performance, features, technology, connection options, and materials used in the construction of these valves.

Performance: The maximum pressures and temperatures for the valves depend on the pressure/temperature ratio, materials, size (DN), and type of fluid.

Features:

One-piece ball valves with a robust design made of stainless steel.
Full port only with connections screwed in the body.
Retightenable cable gland system with triple stem sealing.

Technology: The valves use a one-piece floating ball design.

Connection Options:

Welded version available.
Female/female Rp thread compliant with UNI ISO 7/1 (UNI EN 10226).
Cylindrical DIN 2999 and male/female thread up to DN50.

Ball Design: Features a standard integrated decompression system and is designed for reduced pressure loss. Special finishes are available upon request.

Lever and Sealing: Standard stainless steel lever for the entire range with PTFE sealing.

Standards:

Face to face: EN 12982
Design: EN 13445 / DIN 3840 / EN 12516.3
Sealing: NF EN 12266 / ISO 5208 Rate A

Options:

+15% glass reinforced PTFE for temperatures -20 °C to +175 °C.
Carbon/graphite reinforced PTFE for temperatures -20 °C to +180 °C.
PE HD for temperatures -20 °C to +70 °C.
Female/female NPT thread compliant with ANSI B1.20.1.
Degreased valves for oxygen max. 20 bar.
50 mm extension up to DN50.

Parts List: The document includes a detailed parts list with materials, primarily stainless steel (AISI 316, 304) and PTFE components.

Pressure/Temperature Curves: The document provides pressure/temperature curves to illustrate the operational limits of the valves.

Catalog excerpts

SAPAG-0043-ENG-2306 The maximum pressures and temperatures depend on the pressure / temperature ratio, materials, size (DN) and type of fluid. Performances One piece ball valves: Stainless steel; Full port only; GACHOT® BALL VALVES Robust design; Connections screwed in body. One piece floating ball Cable gland Retightenable system: triple stem sealing. • • • Cylindrical DIN 2999; Male/female thread up to DN50 (male R ISO 7/1 (UNI EN 10226), cylindrical female). Standard integrated decompression system; Designed with reduced pressure loss; Female/female Rp thread compliant with standard UNI ISO 7/1 (UNI EN 10226); Welded version available; Special finish on request. Standard stainless steel lever for the whole range Design standard Sealing standard SAPAG VALVES FRENCH INDUSTRIAL VALVE MANUFACTURER MONITORING & ADVICE Carbon/graphite reinforced PTFE: -20 °C to +180 °C; Female/female NPT thread compliant with standard ANSI B1.20.1; FULLY TESTED VALVES +15% glass reinforced PTFE: -20 °C to +175 °C; Degreased valves: Oxygen max. 20 bar; 2 Rue du Marais 80400 Ham, FRANCE +33 (0)3 23 81 43 00 [email protected] w w w. s a p a g - v a l v e s . c o m This document is the exclusive property of SAPAG VALVES. The use, reproduction, communication to third parties of this document must be subject to prior written authorization from us. The information contained in this docum

Open the catalog to page 1

SAPAG-0043-ENG-2306 Parts List Name Stainless steel: AISI 316 / 1.4408 Female sleeve Stainless steel: AISI 316 / 1.4408 Stainless steel: AISI 316 / 1.4401 Stainless steel: AISI 316 / 1.4401 Body gasket Lower seal Cable gland washer Retaining ring Belleville washer Clamping nut Lock washer Nut Lever Stainless steel: AISI 304 / 1.4301 Stainless steel: AISI 304 / 1.4301 Stainless steel: AISI 304 / 1.4301 Stainless steel: AISI 301 / 1.4310 Stainless steel: AISI 304 / 1.4301 Stainless steel: AISI 304 / 1.4301 Stainless steel: AISI 304 / 1.4301 Pressure / Temperature Curves This document is the exclusive...

Open the catalog to page 2

V7

V7

Catalog excerpts

All Sapag Valves catalogs and technical brochures