JMT
2Pages

SAPAG-0039-ENG-2301 The maximum pressures and temperatures depend on the pressure / temperature ratio and the type of fluid. -60 °C Resilient seated and bidirectional valve with PTFE / PFA liner Lug DN 25-1200 RESILIENT SEATED BUTTERFLY VALVE WITH PTFE LINER GACHOT® * Can be made from DN 350 to DN 1200 with lug bodies and unthreaded holes. Design standard Test standard Top flange enabling direct actuator installation. Operating pressure Safety & sealing Designed to be used with abrasive fluids, Well tried and tested sealing system, Superior performance thanks to high-tech components. Enhanced service life due to the round disc and liner, Reduced torque thanks to the round and polished disc, The complex shape of elastomer bearings helps to increase the valve’s service life. Its modular design enables the valve structure to adjust to various industrial requirements. Plant trial Porosity test of PFA disc coating and PTFE / mod. PTFE liner according to EN 60243-1, Actuating torque checks. Product designed and produced by ChemValves-Schmid FOLLOW-UP & ADVICE Modified PTFE, which increases durability with fluids such as chlorine, hydrogen fluoride, high temperatures, etc. DESP 2014 / 68 / UE ATEX 2013 / 34 / UE CE 1935:2004 / FDA Ta-Luft VDI 2440 C Surface property with magnification factor x50 A Permanent distortion after cycling Permanent Deformation after Cyclic Load PTFE PTFE VirginVierge SAPAG VALVES PTFE Modifié Modified PTFE FRENCH INDUSTRIAL VALVE MANUFACTURER 2 Rue du Marais 80400 Ham, FRANCE +33 (0)3 23 81 43 00 info@sapag-valves.com w w w. s a p a g - v a l v e s . c o m Load: 150 bar for 100 hours, Temperature 23 °C Permanent distortion is %, 24 hours after removing load B Permeability of given chemicals TFM provides improved installation reliability and valve durability, thus enabling you to minimize downtime and maintenance, while enhacing operational safety. This document is the exclusive property of SAPAG VALVES. The use, reproduction, communication to third parties of this document must be subject to prior written authorization from us. The information contained i

SAPAG-0039-ENG-2301 Parts List Name Other material (T) Modified PTFE (C) Conductor modified PTFE (U) UHMPE Safety bearing (C) Conductor modified PFA (S) Stainless steel (F) Polished stainless steel Ra < 0.8 µm (G) Electro-polished stainless steel Ra < 0.4 µm (T) Titanium (H) Hastelloy C (S) Stainless steel (C) Carbon steel (K) Plastic Shaft output Body type Modified PTFE Design standard Face to Face standard Test standard Connection standard Pressure / Temperature Curves This document is the exclusive property of SAPAG VALVES. The use, reproduction, communication to third parties of this...