SANYO DENKI CLOSED LOOP STEPPING SYSTEMS I V I W ^ I I NU.I LJ Closed Loop Stepping Systems Semiconductor manufacturing equipment, food machinery, and general industrial machinery Space Saving and Wire Saving This driver can control up to four stepping motors and requires less than half the installation space of four conventional drivers.*1 Also, only one power supply and I/O signal cable are necessary, reducing the amount of wiring. Takt Time Reduction In addition to the conventional closed loop control that eliminates step-out—a shortcoming of stepping motors-the new model includes a mode that also eliminates delays in position commands.*2 Without any delays in position commands, device takt time is reduced. Flexible Resolution Settings Position command resolution can be set between 200 P/R and 51,200 P/R, enabling operation at the suitable resolution required for the device. Easy Analysis of Settings and Operating Status Setup software downloaded from our homepage can be used to easily adjust control parameters, execute test runs, and monitor operation status from a PC. *1: Our conventional product model no. PB3D003M200 *2: Deviation-free closed loop control

Pulse train input Input source Main power supply 24 / 48 VDC 10% Control power supply 24 VDC Basic specifications Source current Environment Protection class Class Operation environment Installation category (overvoltage category): Maximum speed Holding brake control function Internal Protection functions Main circuit overcurrent, overload error, initialization error, driver overheat, main circuit overvoltage, regeneration error, main circuit low voltage, control circuit low voltage, encoder disconnection, overspeed error, position deviation error, wrap around, memory error, CPU peripheral circuit...