AC_San_Ace
56Pages

{{requestButtons}}

Catalog excerpts

AC_San_Ace - 3

Technical Material Characteristics calculation method and description ••• P.46

Open the catalog to page 3
AC_San_Ace - 4

Domain Diagram AC Fan Air Flow(m 3 /min) Frame Size Conversion table Safety standard list AC Fan Frame size

Open the catalog to page 4
AC_San_Ace - 6

Safety standard list Plug Code ✓ UL CSA TÜV and CE acquired Model.No Applicable model Applicable model The meaning of the specifications Model No. Voltage Frequency Input Current Locked Rotor Current Rated Speed Max. Air Flow SPL Operating Temperature Range Expected Life Locked Rotor Current Rated Speed A Operating Temperature Expected Life This is the necessary voltage to drive the fan. Single-phase AC100V, AC115V, AC200V and AC230V are also available. This is a frequency of alternating current(AC). The frequencies of 50Hz and 60Hz are existing in Japan. Performance of AC fan varies...

Open the catalog to page 6
AC_San_Ace - 7

The Canadian Standards Association (CSA) was set up in response to the advice of the Canadian government. In Canada, the law prohibits the use and sale of any product other than those approved under CSA in terms of safety. CSA has set up CSA standards as inspection procedures and other requirements to ensure product safety. Our products are certified as satisfying the CSA standard C22.2 No. 113. In the EU territory, the harmonization of industrial standards and safety standards of different countries is under way. The unified standards are called Harmonized Standards. Each of these...

Open the catalog to page 7
AC_San_Ace - 8

General Specifications Material Expected Life Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Varies for each model (L10: Survival rate: 90% at 60 , rated voltage, and continuously run in a free air state) 50/60Hz 1,500VAC 1minute (between lead conductor and frame) black, 2pcs 30 to 70 (Non-condensing Dielectric Strength Lead Wire Storage Temperature Locked Rotor Current Rated Speed A Operating Temperature Expected Life Dimensions Unit : mm 8- 4.3 Mounting Hole 10 Lead Wire AWG26 UL1430 M4 0.7 Earth Ground tap Air Flow Direction Rotating Direction Reference dimension of mounting...

Open the catalog to page 8
AC_San_Ace - 9

Finger guards color Model: 109-139E Surfacetreatment : Nickel-chrome plating (silver) : 109-139H : Cation electropainting (black) Inlet side. Outlet side Resin finger guards Resin filter kits Air Flow - Static Pressure Characteristics

Open the catalog to page 9
AC_San_Ace - 10

General Specifications Material Expected Life Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Varies for each model (L10: Survival rate: 90% at 60 , rated voltage, and continuously run in a free air state) 50/60Hz 1,500VAC 1minute (between lead conductor and frame) black, 2pcs 30 to 70 (Non-condensing Dielectric Strength Lead Wire Storage Temperature Locked Rotor Current Rated Speed A Operating Temperature Expected Life Dimensions Unit : mm 8- 4.3 Mounting Hole M4 0.7 Earth Ground tap Air Flow Direction Rotating Direction Reference dimension of mounting holes and vent opening...

Open the catalog to page 10
AC_San_Ace - 11

Finger guards color Model: 109-139E Surfacetreatment : Nickel-chrome plating (silver) : 109-139H : Cation electropainting (black) Inlet side. Outlet side Resin finger guards Resin filter kits Air Flow - Static Pressure Characteristics

Open the catalog to page 11
AC_San_Ace - 12

20mm thick 25mm thick, 38mm thick, 42mm thick General Specifications Material Expected Life Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Varies for each model (L10:Survival rate: 90% at 60 , rated voltage,and continuously run in a free air state) 50/60Hz 1,500VAC 1minute (between input terminal and frame or between lead conductor and frame black, 2pcs 30 to 70 (Non-condensing Dielectric Strength Lead Wire Storage Temperature Locked Rotor Current Rated Speed A Operating Temperature Expected Life M4 0.7 6 M4 0.7,6mm deep Earth Ground tap 300L AIR FLOW Lead Wire AWG22 UL1430...

Open the catalog to page 12
AC_San_Ace - 13

Finger guards color Model: 109-049C Surfacetreatment : Nickel-chrome plating (silver) Outlet side Model: 109-049E Surfacetreatment : Nickel-chrome plating (silver) : 109-049H : Cation electropainting (black) Inlet side. Outlet side Resin finger guards Resin filter kits ■ Air Flow - Static Pressure Characteristics

Open the catalog to page 13
AC_San_Ace - 14

San Ace 80 20mm thick 25mm thick, 38mm thick, 42mm thick General Specifications Material Expected Life Dielectric Strength Storage Temperature Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Varies for each model (L10:Survival rate: 90% at 60 , rated voltage,and continuously run in a free air state) 50/60Hz 1,500VAC 1minute (between input terminal and frame or between lead conductor and frame 30 to 70 (Non-condensing Locked Rotor Current Rated Speed Operating Temperature Expected Life M4 0.7,6mm deep 0.7 6 Earth Ground tap Rotating Direction Reference dimension of mounting holes...

Open the catalog to page 14
AC_San_Ace - 15

Finger guards Resin finger guards Options Unit : mm Model 109-1002G Color Surface treatment Nickel-chrome plating silver Outlet side 101.2 Color Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 109-1002F13 13PPI 109-1002F30 30PPI Inlet side, Outlet side Plug cord (UL/CSA CERTIFIED) UL FILE No.E50197 CSA FILE No.LR67048 Model 489-047-L10 /489-047-L21 (Products compliant with Electrical Appliance and Material Safety Law) Model 489-016-L 10 /489-016-L 21 Power cord length(mm) mm 1,000 2,100 Air Flow - Static Pressure Characteristics Static...

Open the catalog to page 15
AC_San_Ace - 16

20mm thick 25mm thick, 38mm thick, 42mm thick General Specifications Material Expected Life Frame: Aluminum, Impeller:Plastics (Flammability: UL94V-1) Varies for each model (L10:Survival rate: 90% at 60 , rated voltage,and continuously run in a free air state) 50/60Hz 1,500VAC 1minute (between input terminal and frame or between lead conductor and frame 30 to 70 (Non-condensing Dielectric Strength Storage Temperature Locked Rotor Current Rated Speed min-1 Operating Temperature Expected Life Rotating Direction Reference dimension of mounting holes and vent opening Unit : mm Inlet side Wiring...

Open the catalog to page 16
AC_San_Ace - 17

Finger guards Resin finger guards Options Unit : mm Model 109-1002G Color Surface treatment Nickel-chrome plating silver 101.2 Color Surface treatment Nickel-chrome plating silver Cation electropainting black Resin filter kits Model 109-1002F13 13PPI 109-1002F30 30PPI Inlet side, Outlet side Plug cord (UL/CSA CERTIFIED) UL FILE No.E50197 CSA FILE No.LR67048 Model 489-047-L10 /489-047-L21 (Products compliant with Electrical Appliance and Material Safety Law) Model 489-016-L 10 /489-016-L 21 Power cord length(mm) mm 1,000 2,100 Air Flow - Static Pressure Characteristics Pa Static Pressure

Open the catalog to page 17

All SANYO DENKI America catalogs and technical brochures

  1. San Ace 40L

    4 Pages

  2. SANMOTION R 3E

    172 Pages

  3. SANMOTION T

    36 Pages

  4. SANMOTION F5

    128 Pages

  5. SANMOTION F2

    84 Pages

  6. SANMOTION C

    12 Pages

  7. DC Fan Catalog

    247 Pages

  8. San Ace 92W

    4 Pages

  9. San Ace B97

    2 Pages

  10. San Ace 40

    2 Pages

  11. San Ace 60T

    2 Pages

  12. Blower

    20 Pages

  13. ACDC Fan

    5 Pages

  14. SANMOTION R

    40 Pages

  15. Hybrid UPS

    8 Pages

Archived catalogs

  1. DC_San_Ace

    332 Pages

  2. PD-D11A

    8 Pages