*mydirectindustry

Catalogs
SANY
STC1300C 130T mobile crane

STC1300C 130T mobile crane

Product catalog summary

Company Introduction: SANY Automobile Hoisting Machinery, a division of Sany Heavy Industry, focuses on developing high-end cranes, particularly mid to large tonnage series. The company is globally recognized for its advanced technology and reliable service, operating industrial parks in Ningxiang and Huzhou.

Selling Points: The STC1300C Truck Crane features advanced electronic control with a proprietary SYMC controller and CAN-bus network. It includes innovative counterweight technology for enhanced boom stability and a six-section high-strength steel boom. The crane's 5-axle chassis and energy-efficient hydraulic control ensure reliable performance.

Technical Specifications: The STC1300C has a maximum lifting capacity of 130 tons, dimensions of 15485 mm x 3000 mm x 4000 mm, and is powered by a 350 kW V-type eight-cylinder diesel engine. It features a 12-speed transmission and can travel up to 85 km/h with a minimum turning radius of 11 m.

Safety and Control Systems: Equipped with a load moment limiter, balance and overflow valves, and safety features like over-roll out limiters and anemometers. The control system includes a CAN-bus instrument and automatic outrigger system with fault diagnosis.

Operational Conditions: The crane operates efficiently between -20°C and +40°C, with a maximum lifting moment of 5160 kN·m. The boom extends from 13.3 m to 60 m, achieving a maximum lifting height of 78.1 m with the jib.

Load Chart: Detailed load charts provide lifting capacities at various boom lengths and radii, essential for safe operation under different conditions.

Load Chart Summary: The boom extends from 13.3 m to 60 m, with outriggers spanning 7.6 m x 7.6 m and allowing 360-degree rotation. Counterweights are available in 20T, 27T, and 40T configurations, affecting lifting capacities.

Key Observations: Lifting capacity decreases with increased boom length and radius. Higher counterweight configurations enhance lifting capacities at extended radii. Load charts are crucial for determining safe lifting capacities.

Overview: The document provides comprehensive technical specifications and operational guidelines for the STC1300C Truck Crane, including load charts and telescoping modes.

Specifications: Maximum boom length is 60 m with additional jib lengths of 10.7 m or 18 m. The crane supports 360° rotation with a 40T counterweight.

Load Charts: Detailed charts for different boom elevations and lifting capacities at various radii are included.

Telescoping Modes: The crane operates in multiple telescoping modes with varying load capacities.

Operational Guidelines: Prerequisites for safe operation include boom conditions and counterweight specifications.

Additional Information: Specifications may change without notice, and optional equipment is available at additional cost. Contact information for SANY is provided for inquiries.

Catalog excerpts

STC1300C STC1300C TRUCK CRANE 130 TONS LIFTING CAPACITY Quality Changes the World

Open the catalog to page 1

COMPANY BRIFE INTRODUCTION COMPANY BRIFE INTRODUCTION SANY Automobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry, mainly engaged in the research and development of high end, mid to large tonnage crane series, including mobile crane, crawler crane, tower crane and loader crane. It has two industrial parks in Ningxiang and Huzhou, since entering the market, the products of Sany Automobile Hoisting Machinery have received worldwide recognition with advanced technology, lean manufacturing, high reliability and excellent service. Quality Changes the World Quality Changes...

Open the catalog to page 2

Selling points Icon Selling Points Introduction Dimension Technical Parameter Operation Condition Load Chart Counterweight Sketch Map Wheel Crane Family Map Creative counterweight pushing technology With full-counterweight weight of 40T, when counterweight is pushed backwards for 860mm, stability of the boom can be improved by up to 25%, thus improving lifting capacity and stability. Carrier frame Telescopic boom Control system The use of innovative 5-axle chassis design and multi braking modes provide more reliable traveling performance for chassis. With topping over early-warning technology,...

Open the catalog to page 3

■ The self-made cab adopts ergonomic design with sliding door, safety glass, anti-corrosion steel, soft interior decoration, large interior space, panoramic sunroof and adjustable seats, air conditioner and electric window wiper etc., providing easier and more comfortable operation. Load moment limiter display is conﬁgured to achieve the combination of main console and operating display system, making all operating condition data of lifting operation clear at a glance. Hoisting system ■ The adoption of pump and motor double variable speed control ensures high efﬁciency and excellent energy saving...

Open the catalog to page 4

Chassis Type: V-type eight-cylinder, water cooled, supercharged and inter-cooling diesel engine Rated power: 350kw/1800r/min Environment-protection: Emission complies with EuroⅢ standard Capacity of fuel tank: 450L ■ Gearbox: Manual / Automatic gearbox is adopted with 12 forward gears, 2 backward gears and large speed ratio range applied, which meets the requirements of low gradeability speed and high traveling speed. ■ Transmission shaft: With optimized arrangement of the transmission shaft, the transmission is stable and reliable. For most optimized transmission, face-tooth coupling transmission...

Open the catalog to page 5

TECHNICAL PARAMETER STC1300C Working Ranges Type SANY Quality Changes the World Quality Changes the World

Open the catalog to page 6

OPERATION CONDITION LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ Side and rear are applied ④ Counterweight is 0T Radius（m） Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ Side and rear are applied ④ Counterweight is 0T

Open the catalog to page 7

LOAD CHART LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ Side and rear are applied ④ Counterweight is 12T Radius（m） Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ Side and rear are applied ④ Counterweight is 12T Quality Changes the World

Open the catalog to page 8

LOAD CHART LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ Side and rear are applied ④ Counterweight is 12T slideing counterweight Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ Side and rear are applied ④ Counterweight is 12T slideing counterweight

Open the catalog to page 9

LOAD CHART LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 20T Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 20T

Open the catalog to page 10

LOAD CHART LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 20T sliding counterweight Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 20T sliding counterweight

Open the catalog to page 11

LOAD CHART LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 27T Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 27T

Open the catalog to page 12

LOAD CHART LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 27T sliding counterweight Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 27T sliding counterweight

Open the catalog to page 13

LOAD CHART LOAD CHART Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 40T Prerequisites: ① Boom operating conditions(fully extended boom length ),min. length is 13.3m and max.length is 60m ② The span of outriggers is 7.6m×7.6m ③ 360°rotation is applied ④ Counterweight is 40T

Open the catalog to page 14

STC1300C 130T mobile crane

STC1300C 130T mobile crane

Catalog excerpts

All SANY catalogs and technical brochures

Archived catalogs