Catalogs >
SANY >
SANY SCM500-3 MILLING MACHINE

SANY SCM500-3 MILLING MACHINE
4Pages

Catalog excerpts

MILLING MACHINE Discharge conveyor height easily adjustable to 4.7m maximum and 45° right or left swing angle. Operator station shade easily slides 500mm to the right or left to avoid branches, signs or other obstacles when doing flush-to-curb milling. Maximum milling depth of 330mm means only a single pass is required to mill surface course, binder course and base course. The 17.4t/m rotor load ratio can effortlessly handle concrete, modified asphalt and other hard road surfaces. Single key, integrated control technologies, like operation pause/resume, reduce manual operation by 30%. With its proven automatic power distribution and control system, the continually variable transmission (CVT) matches the machine travel speed to the engine load for maximum working efficiency at all times. Comprehensive, weather resistant fault diagnosis and alarm system accurately pinpoints problems for less downtime. Open style discharge conveyor reduces belt replacement time by 40%. Multiple access covers mean less time required to locate and service machine components. High strength, abrasion resistant steel plates at key positions provide long service life. Drive belts with the same material used in military flak jackets resist shock and high operating temperatures. Vibration level decreased by 50% means less wear and tear on machine components, thus more uptime for greater profitability. Quality Changes the World. www.sany.com.cn Sany Industrial Town, Changsha Economic and Technological Development Zone Hunan, China 410100 Tel.: +86(0)731-84031888. Fax: +86(0)731-84031888 Post Sales Service Hotline: 400887

Open the catalog to page 1

SCM500-3 Milling Machine Technical Parameters Item Rated power Control mode Full electronic control Full-load fuel consumption（L/h） Milling width(mm)： Milling depth(mm)： Working performance Travelling (milling) speed(m/min)： Ground clearance（mm） Transport weight(kg)： Working weight(kg)： Front track(L×W×H/mm) Rear track(L×W×H/mm) Fuel tank（L）： Tank capacity Level-1 belt width （mm） Material conveying system Water tank（L）： Note: 1) The working weight includes that of a half tank of water, a half tank of fuel, the operator (75 kg) and cutting tool; 2) The standard milling width is 2,010 mm....

Open the catalog to page 2

MILLING MACHINE High strength, abrasion resistant steel plates at key positions provide long service life. At 850mm, the super-wide discharge conveyor allows a 25% increase in conveying capacity. Drive belts with the same material used in military flak jackets resist shock and high operating temperatures. Vibration level decreased by 50% means less wear and tear on machine components, thus more uptime for greater profitability. Maximum milling depth of 330mm means that only a single pass is required to mill the surface course, binder course and base course. An advanced design, fork type...

Open the catalog to page 3

SCM600-3 Milling Machine Technical Parameters Item Manufacturer/model Fine mode Efficient mode Economic mode Control mode Full-load fuel consumption（L/h） Milling width(mm)： Milling depth(mm)： Flush-to-curb milling depth（mm）： Travelling (milling) speed(m/min)： Ground clearance（mm） Transport weight(kg)： Working weight(kg)： Front track (L×W×H/mm) Rear track (L×W×H/mm) Fuel tank（L）： Hydraulic oil tank（L）： Water tank（L）： Level-1 belt width （mm） Level-2 belt width（mm） Max. conveying height（mm） Working performance Weight Track Tank capacity Material conveying system Note: 1) The working weight...

Open the catalog to page 4