SANY CRAWLER CRANE SCC 1350E

P3 SCC1350E Crawler Crane Basic size of overall crane Main technical characteristics Performance parameter Transportation dimension Transport program Schematic diagram of disassembly Detailed introduction Upperworks Lowerworks Operation equipment Safety device Combination of Operating Modes Working condition combination Boom H working condition Fixed jib FJ working condition

SANY Crawler Crane SCC1350e Basic size of overall crane Main technical characteristics 1.Powerful lifting capacity 8. Excellent operating performance For the main boom, the maximum lifting capacity is The load sensing, ultimate load regulation and electro- 140t, the maximum lifting moment is 95.4t×7m=668t·m, hydraulic propor tional dead slow c ontrol ensures and the maximum length is 80m. For the fixed jib, excellent micro-motion of each action, and smoother the maximum lifting capacity is 30t, and the longest 9.Strong power supply 2. Global transportation standard The third- stage emission engine...

SANY CRAWLER CRANE SCC1350E Carbody (including base)

SANY CRAWLER CRANE SCC1350E transportation dimension transportation dimension Boom extension x1 Fixed jib base (including spreader) x1 3m boom intermediate section x1 6m boom intermediate section x3 Notes: 1. It's a schematic diagram of transport dimension of the spare part, which is not drawn to scale. The marked dimension is the design value, excluding the packaging. 2. The weight is a design value, and may be slightly different due to the manufacturing error.

SANY Crawler Crane SCC1350e Transport program Schematic diagram of disassembly 1) Self-assembly of basic crane 800 Basic crane (three winches, base, outrigger, mast and all wire ropes) and base Total: 32.8t 3) Self-assembly of central ballast Counterweight block: 5.5t Central ballast*2: 20t 12m boom: 1.96t 6m boom: 1.06t 6m fixed jib: 0.34t Fixed jib tip: 0.53t 130T lifting hook: 1.8t 80T lifting hook: 1.57t 35T lifting hook: 1.08t 13.5T lifting hook: 0.47t Total: 34.31t Counterweight tray: 10t Counterweight*2: 11t Boom tip: 2.79t 6m boom: 1.06t 3m boom: 0.63t Fixed jib base: 0.84t Rear pendant...

detailed introduction upperworks 1) Engine ■ SC9DF340Q3 in-line six-cylinder, four-stroke, water-cooled, turbo charged and intercooled electronic control diesel engine of SDEC have 251kW rated power and 2200rpm rated speed. The maximum output torque is 1,430Nm/1,400rpm. ■It complies with the third-stage non-road emission standard. ■Fuel tank: the volume is 400L, and the fuel capacity is shown by oil pointer and electronically. 2) Electrical control system ■ It employs the advanced central control unit, torque limiter, display, sensor and closed-circuit monitoring system. ■Reliability: the main...

SANY CRAWLER CRANE SCC1350E lowerworks 5) Boom luffing device ■ The boom luffing drum has the pawl and ratchet locking device to ensure the placement safety of boom in non-operating state. Boom luffing device Boom from 15° to 86° 90s Diameter of wire rope 20mm Length of boom luffing wire rope 270m Rated single rope pulling force 7.8t 6) Slewing mechanism ■ It employs three-row roller slewing bearing, and large-displacement single-motor reduction gear drive; the slewing speed is 0-2.2r/min; it has the function of neutral-position free slipping and can provide 360° slewing. When the...

SANY CRAWLER CRANE SCC1350E operation equipment safety device 1) Boom ■ Main chord is made of high-strength material, and the boom system employs a space truss structure with uniform section in the middle and variable section at both ends. ■ The standard boom has a 7m base, a 10m tip, a 3m intermediate section, four 6m intermediate sections and three 12m intermediate sections. ■ The length of the boom is variable between base boom (17m) and the maximum length (80m), which increases progressively by 3m. ■ The boom extension is installed on boom tip. 2) Fixed jib ■ Main chord is made of high-strength...

SANY CRAWLER CRANE SCC1350E 10） Fault self-diagnosis system 16） Travel or slewing prompt It can generate fault alarm information automatically, check During traveling or slewing operation, the operation warning the live operating state of the electrical line and help to light will flash with buzzing. remove electrical fault rapidly. Working condition combination Boom H working condition 11） Navigation mark light When the operator leaves the seat or the functional locking Fixed jib FJ working condition It is installed on the top of the boom system, which allows the lever isn't in position, the...

working condition combination boom h working condition Boom combination Mid-point suspension cable Note: Choose any intermediate section for the combination with the same boom length, preferably the longer intermediate section. Boom H working condition Fixed jib FJ working condition Boom H working condition: 17m-80m 19

SANY CRAWLER CRANE SCC1350E diagram of operation range of load table of boomboom working condition Diagram of operation range of boom (H) working condition Load table of H working condition of SCC1350E crawler crane 85 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 Main hook, boom 17-80m, without boom extension 32 35 38 Notes: 1. The actual lifting weight is equal to the value that the rated lifting weight in the table subtracts the weight of all the lifting devices such as lifting hook. 2. The rated lifting weight in the table is the weight of the non-traveling weight which is lifted slowly...

SANY CRAWLER CRANE SCC1350E load table of boom fixed jib fj working condition Fixed jib combination Load table of H working condition of SCC1350E crawler crane Intermediate section Boom length Boom to jib (m) angle Main hook, boom 17-80m, without boom extension Unit: t 56 59 62 65 68 71 74 Note: The boom less than 35m has the interval of the boom length of 6m; The boom greater than 35m has the interval of the boom length of 3m. Fixed jib FJ working condition: (17m-71m) + (13m-31m) Notes: 1. The actual lifting weight is equal to the value that the rated lifting weight in the...