Catalogs >
SANY >
SANY BRAND SCC550E 55 TONS CRAWLER CRANE FOR CONSTRUCTION

SANY BRAND SCC550E 55 TONS CRAWLER CRANE FOR CONSTRUCTION
17Pages

Add to favorites

Catalog excerpts

HYDRAULIC CRAWLER CRANE SCC 550E

Open the catalog to page 1

SCC550E Crawler Crane Outline dimensions Technical Features Performance Parameters Table Transportation Dimensions Hoisting Diagram Specifications Superstructure Undercarriage Operation Devices Safety Devices P16 Operating Condition Combination Operating Condition Combination H Operating Condition of Boom FJ Operating Condition of Fixed Jib

Open the catalog to page 2

SANY Hydraulic Crawler Crane SCC550E OUTLINE dimensions Technical Features 1. Highly Secured Control System: There are two operation modes, working and assembly It takes no more than 10min/person to adjust, no more for your convenience. It features with electronic level than 30 min/person for daily maintenance and no more gauge, machine-leaving stop action, and emergency than 2h/person to repair the machine.GPS remote electrical control, with complete set of safet y and monitoring system is optional for easy maintenance and monitoring device. Load moment limiter is free of calibration,...

Open the catalog to page 3

SANY HYDRAULiC CRAWLER CRANE SCC550E performance parameters table transportation dimensions Performance Parameters of SCC550E Crawler Crane Performance index Unit Parameter Note: I.Considered the matching with the pump unit, engine output power / Max. speed is limited to 132KW/2000rpm. 2.the item with * means that rope speed of main / auxiliary winch, rope speed of luffing winch, slewing and traveling speeds will change with the load 3. the average ground pressure is only for reference and the actual ground pressure should be calculated based on the real working conditions. Body (not...

Open the catalog to page 4

SANY HYDRAULiC CRAWLER CRANE SCC550E transportation dimensions transportation dimensions 9m Boom Insert x2 Lifting hook 1. The transportation dimensions are not drawn to proportion. The dimensions in the sketch are design value excluding packages. 2. The weight is design value and there may be tiny difference due to the manufacturing calibration 3. After product upgrading, the actual weight is subjected to the latest products.

Open the catalog to page 5

specifications / superstructure 1) Engine ■ 6BTAA5.9-C180, 6-cylinder, turbocharging & air-air intercooler ■ Displacement: 5.9L ■ Rated Power: 132kW/2200RPM (considered the matching with the pump, rated power is limited to 132kW/2000RPM) ■ Max. torque: 800 N-m 1400RPM ■ Emission Standard Tier II ■ Fuel Tank: 400L° 2) Electrical Control System ■ The CAN bus technology is applied for data communication between integrated moment intelligent control system and data recorder, and for saving the relevant data. ■ Display can show engine speed, fuel level, oil pressure, servo pressure, wind speed,...

Open the catalog to page 6

SANY HYDRAULiC CRAWLER CRANE SCC550E superstructure 5) Luffing Mechanism ■ The winch drum is directly driven by winch motor through reducer, and can rotate into two directions through the manipulation of luffing handle to carry out lifting and lowering actions of the hook. ■ Motor reducer of well-known brand is adopted for higher reliability and durability. ■ The drum design ensures the multi-layer winding is always in order. ■ Steel wire of well-known brand is adopted for higher reliability and durability. NO.2 Luffing Mechanism Rate single line pull 3.7t 6) Swing Mechanism ■ The inner...

Open the catalog to page 7

SANY HYDRAULiC CRAWLER CRANE SCC550E operation devices safety devices 1) Boom ■ Lattice structure; main chord made of high strength structure steel; each section is connected with pins. ■ Basic Boom: 6.5m boom tip and 6.5m boom base; ■ Insert: 3mX1, 6mX3, 9mX2» ■ Boom Length: 13m~52m. 2) Fixed Jib ■ Lattice structure; main chord made of high strength structure steel; each section is connected with pins. ■ Basic Boom: 3.05m boom base and 3.05m boom tip. ■ Insert: 3.05mX 3. ■ Jib Length: 6.1m~15.25m. ■ Longest boom + longest jib: 43m boom + 15.25m jib. 3) Boom Extension Welded structure; It...

Open the catalog to page 8

SANY HYDRAULIC CRAWLER CRANE SCC550E 10) Boom Back-stop Device Composed of nesting tubing and spring. It buffers the energy of boom backwards tilting by spring force to prevent the boom from tilting backwards. 11) Boom Angle Indicator The angle indicator device is fixed on the boom base near the cab for convenient view of operator. There are baffle on the hook to prevent the wire rope fall off. 13) Monitoring System Remote monitoring system is optional for GPS positioning, GPRS data transfer, machine use inquiries, running data monitoring, analysis and remote fault diagnosis. 14)...

Open the catalog to page 9

SANY Hydraulic Crawler Crane SCC550E Operating Condition Combination H Operating Condition Combination Boom length Basic Boom 9m Boom intermediate section 9m Boom intermediate section Notes: The boom combination remarked with ★ is optimized ; 6m Boom intermediate section 6m Boom intermediate section 6m Boom intermediate section 3m Boom intermediate section

Open the catalog to page 10

SANY HYDRAULiC CRAWLER CRANE SCC550E operating range diagram of boom load chart(h operating condition) SCC550E boom Rated Load Chart 1. When the crane is hoisting, the crawler frame must be in the state of extension 2. The rated load indicated in the table is the weight hoisted slowly and steadily on a level and hard soil ground when the crane is not travelling. 3. The rated load indicated in the table is the calculated value by taking 75% of the tipover load when the wind speed is below 9.8m/s. 4. All values in the load chart are applicable for 360° rotation. 5. The rated load value in...

Open the catalog to page 11

SANY Hydraulic Crawler Crane SCC550E FJ Operating Condition (Fixed Jib Operating Condition) Operating Range Diagram of FJ Operating Condition Angle between boom and jib 60° 43m boom + 15.25 jib Angle between boom and jib of 10° 40m boom + 15.25 jib Angle between boom and jib of 10° 37m boom + 15.25 jib Angle between boom and jib of 10° 34m boom + 15.25 jib Angle between boom and jib of 10° 31m boom + 15.25 jib Angle between boom and jib of 10° 28m boom + 15.25 jib Angle between boom and jib of 10° 25m boom + 15.25 jib Angle between boom and jib of 10° 22m boom + 15.25 jib Angle between boom...

Open the catalog to page 12

SANY HYDRAULiC CRAWLER CRANE SCC550E Boom 22m Fixed Jib 6.1m~15.25m Rear Counterweight 18t Note: Value marked with grey color is determined by boom strength Note: Value marked with grey color is determined by boom strength

Open the catalog to page 13