Aim To Be The World's Safest Environmental Test Chamber

SAliVJOOD' Environmental Test Chambers Focusing on the innovation of Environmental reliability test chamber. Contents Energy saving system 3 Bench-top temperature & humidity test chamber 5 Ultra low temperature test chamber 6 Standard temperature & humidity test chamber 7 Landing type temperature & hum idity test chamber 8 Battery explosion-proof temperature test chamber 9 Walk-in battery explosion-proof temperature test chamber 10 Walk-In temperature & humidity test chamber 11 ESS rapid temperature change test chamber 12 Two-zone thermal shock test chamber 13 Three-zone thermal shock test chamber...

saMmood Environmental Test Chambers Focusing on the innovation ofEnvironmental reliability test chamber. SANWOOD was founded in 1995 with Taiwanese tech nology and increased its capital to plan for a public listed company in 2013.Guangdong Sanwood Technology Co., Ltd. was incorporated. The company focused on the most secure and reliable technologies for environmental test equipments and the overall solutions for the laboratories.lt is a national high-tech enterprise, became a permanent member of National Aerospace Systems Science & Engineering Research Institute executive director and achieved...

Energy-saving refrigeration system Reduce operating costs by 40% It has cooling capacity adjustment devices such as evaporation temperature adjustment and energy regulation. Hot gas bypass energy adjustment to ensure that equipment consumption is reduced and constant temperature at any low temperature point while meeting the main technical specifications, there is no need to heat balance. Different from the traditional one. Simple cooling bypass (heating balance is needed, waste of energy), reducing the power consumption by 40%, which can save the operating cost, which is the most advanced control...

Safety • Protection SANWOOD equipment safety protection principle • Protection of compressors ■ Compression and exhaust temperature adjustment: automatically adjust the exhaust temperature of the compression molding machine to make the compression molding machine temperature protection is within the normal range, allowing it to operate atoptimum conditions,avoiding compressors over-cooling and overheating, prolonging the life of the compressor (compressor over-cooling: freezing oil become thick, may cause the compressor be damaged beucase of short of oil;the compressor is over-heated causing...

Temperature & humidity test chamber Bench-top Temperature & humidity test chamber Lightweight and compact design, the whole chamber has a very small volume and the internal volume can reach 22.5L • International standards Complies with the following standards: ISO 12100 Safety of Machinery The bench-top temperature and humidity chamber series has environmental test performance and compact design. The working room is 22.5L and the temperature range is -40°C ~ +150°C. ■ Compact design ■ Best space use and combination selection ■ Colored LCD touch screen ■ Mobile app/computer remote control ■ Noise...

Temperature & humidity test chamber Small size and wide temperature range Temperature range: -85°C ~ +180°C Meets the temperature change rate specified by JTMK07 and IEC60068-3-5. A compact high performance and reliability test chamber solution covers a wide range of temperature testing requirements from ultra low temperature -85 °C to high temperature +180 °C. It can be connected via Ethernet, you can remotely control via a web browser and monitoring the test chamber. Newly designed square frost-free window made of multi-layer tempered glass and heater to give you better visibility. ■ Wide temperature...

Temperature & humidity test chamber Energy-saving (platinum series) Temperature & humidity test chamberA variety of models, well fit environmental test chamber * Meet the following test standards: • I EC 60068-2-1: Cold • I EC 60068-2-2: Dry heat • I EC 60068-2-14: Change of temperature with specified rate of change • IEC 60068-2-3C: Damp heat,cyclic • IEC 60068-2-38: Composit temperature/humidity cyclic test • IEC 60068-2-78: Damp heat,steady state • IEC 61747 (5.2.7): Liquid crystal and solid-state display devices Environ mental,endurance and mechanical test • ISO 16750-4 (5.3): Road vehicles...

Temperature & humidity test chamber 4 compatible test standards 10.11 Thermal cycling test 10.12 Humidity-freeze test 10.13 Damp-heat test 10.11 Thermal cycling test 10.12 Humidity-freeze test 10.13 Damp-heat test ■ According to the customer's test conditions, the characteristics of the cabinet can be adjusted. ■ Wide temperature range (-70°C to +180°C) ■ Large observation window ■ User-friendly design panel ■ Can achieve remote control (Mobile app/PC) No.88, Songchang Road, Songbotang , Changping, Dongguan, Guangdong , China

Temperature & humidity test chamber Multi-temperature probe (options) Battery explosion-proof temperature test chamberBattery test Automatic fire extinguishing CQ2 device (optional) ■ Explosion-proof safety door handle design ■ Equipped with explosion pressure relief port ■ Automatic extinguishing device ■ Observation window glass with explosion-proof design ■ High strength stainless steel plate Environmental test specifications for batteries Test specifications

Temperature & humidity test chamber Automobile Walk-in Battery Explosion-proof Temperature Test Chamber According to the customer's test conditions, the characteristics of the cabinet can be adjusted. Environmental test specifications for batteries Test specifications Power Battery Test Model No.88, Songchang Road, Songbotang , Changping, Dongguan, Guangdong , China

Temperature & humidity test chamber The prefabricated finished cabinet panel is suitable for any size formulation, easy to assemble and install. Imposition walk-in test chamber using 4" thick polyurethane foam board. The plates are tightly locked to each other to form a sealed test chamber. Stainless steel, aluminum or embossed construction is available to suit different requirements.