- Catalogs
- Sanwood Technology
- Landing Type Temperature (& Humidity) Chamber
Landing Type Temperature (& Humidity) Chamber
Landing Type Temperature (& Humidity) Chamber
- Temperature Control Range: -70°C to 180°C, with specific ranges for different models (A: 0°C to 180°C; B: -20°C to 180°C; C: -40°C to 180°C; D: -70°C to 180°C).
- Temperature Fluctuation: ±0.5°C.
- Cooling Rates: Varying from 0.7°C/min to 3.0°C/min depending on the temperature range.
- Heating Rate: -70°C to 180°C within 60 minutes, at a rate of 3.0°C to 5.0°C/min.
- Temperature Uniformity: ±1.5°C for -40°C to 100°C, ±2.0°C for other ranges.
- Humidity Control Range: 20.0%RH to 98.0%RH, with fluctuation of ±1.0% RH and uniformity of ±2.0 RH.
- Internal Material: 1.2mm thickness stainless steel (SUS304).
- External Material: 1.2mm thickness cold rolled steel sheet with powder spraying.
- Heat Insulating Material: 100mm thickness polyurethane plate and 10mm thickness mineral wool.
- Fan: Centrifugal blower.
- Compressor: Semi-closed type for most models.
- Condenser: Air cooling and water cooling options available.
- Refrigerant: R404A, R23, R508.
- Evaporator: Fin-and-tube heat exchanger.
- Heater: Nickel chromium alloy heating wire.
- Humidifier: Steam humidifier.
- Interior Sizes (mm): Range from 1000x1000x1000 to 2000x2000x2000.
- Outer Sizes (mm): Range from 1200x1550x2450 to 2300x2450x3600.
- Volume: 1000L to 8000L.
Catalog excerpts
environmental test chambers Landing Type Temperature (& Humidity) Chamber environmental test chambers Energy Conservation Remote network system Circuit System International Standard environmental test chambers Temperature control range Temperature f luctuation Cooling rate Heating rate Temperature unif ormity Humidity control range Humidity Humidity unif ormity environmental test chambers Internal material External material Adopts 1.2mm thickness Cold rolled steel sheet / powder spray ing Heat insulating material 100mm thickness poly urethane plate＋10mm thickness mineral wool Adopts 1.2mm thickness stainess steel(SUS304) Centrif ugal blower Fully -closed/ Semi-closed Air cooling, water cooling Air cooling, water cooling Water cooling Water cooling Water cooling Water cooling Fin - and - Tube Heat Exchanger Nickel chromium alloy heating wire Interior size(mm) W*H*D Outer size(mm) W*H*D Volume（L) Power supply Standard: South
Open the catalog to page 1All Sanwood Technology catalogs and technical brochures
Climate chamber SMC-225-CC3 Pages
Rain Test Chamber IPX121 Page
Rain Chamber IPX121 Page
SM-IPX34-15001 Page
SM-IPX34-10001 Page
SM-IPX12-10001 Page
Rain Test Chamber IPX561 Page
Rain chamber IPX561 Page
SM-IPX78-5001 Page
SM-IPX9K-10001 Page
Rain chamber IPX781 Page
Rain test chamber IPX781 Page
High temperature oven1 Page
High temperature oven1 Page
Vacuum Drying Oven1 Page
Dry Oven1 Page
HAST test chamber1 Page
SM-MVH-1700-cc1 Page
SM-SC-500C1 Page
SM-SC-2000C1 Page
Sand and Dust Chamber1 Page
Dust test chamber1 Page
Dust Chamber1 Page
SM-VTH-2000-CC1 Page
SM-VTH-1000-CC1 Page
Altitude Test Chamber1 Page
SM-100-3P-A1 Page
SM-300-2P-A1 Page
SM-150-2P-A1 Page
SM-KS-408-CC1 Page
SM-KS-225-CC1 Page
SM-KS-80-CC1 Page
SMC-150-CC-FB1 Page
SMC-1000-CC-FB1 Page
SMC-80-CC-FB1 Page
SMC-1500-CC-FB1 Page
SMC-400-CC-WT1 Page
SMC-080-WT1 Page
SMC-340-CC-WT1 Page
SMC-250-CC-WT1 Page
SMC-160-CC-WT1 Page
Walk in Test Chamber1 Page
SMC-120-CC-WT1 Page
SMC-800-CC1 Page
SMC-150-CC1 Page
SMC-1000-CC1 Page
SMC-408-CC1 Page
SMC-80-CC1 Page
SMC-225-CC1 Page
SMC-22-CC1 Page
SANWOOD Product Catalog30 Pages
Ozone Chamber1 Page
Humidity Test Chamber1 Page
UV chamber1 Page
ESS Test Chamber1 Page
Walk in Chamber1 Page
Rain chamber IPX9K1 Page
UV Lamp Test Chamber1 Page
Rain Chamber IPX341 Page
HAST Aging Test Chamber1 Page
SANWOOD Product Catalog Part215 Pages
SANWOOD Product Catalog Part115 Pages
Xenon Test Chamver1 Page
Rain Test Chamber IPX91 Page
Salt Test Chamber1 Page
Xenon Test Chamber1 Page
AGREE Test Chamber1 Page
Salt Spray Test Chamber1 Page
Ozone Test Chamber1 Page
Rain test chamber IPX341 Page
HAST Chamber1 Page
Explosion proof chamber1 Page
benchtop test chamber1 Page
SM-PCT-400-A1 Page
SM-PCT-300-A1 Page
SM-PCT-250-A1 Page
SM-IPX56-10001 Page
Ozone Aging Chamber1 Page
SM-F-8000CA1 Page
SM-F-180CA1 Page
SM-F-200CA1 Page
SM-F-160CA1 Page
SM-F-120CA1 Page
SM-Y-200D1 Page
SM-Y-90D1 Page
SM-Y-160D1 Page
SM-Y-120D1 Page
SM-Y-60D1 Page
SM-UV2000-C1 Page
SM-UV800-C1 Page
SM-UV600-C1 Page
SM-XD-3600-CA1 Page
SM-XD-1000-CA1 Page
SM-XD-600-CA1 Page
SM-XD-400-CA1 Page
SM-500-3P-A1 Page
SM-300-3P-A1 Page
SM-200-3P-A1 Page
SM-150-3P-A1 Page
SM-80-3P-A1 Page
SM-50-3P-A1 Page
SM-500-2P-A1 Page
SM-200-2P-A1 Page
SM-100-2P-A1 Page
SM-80-2P-A1 Page
SM-50-2P-A1 Page
SM-KS-1500-CC1 Page
SM-KS-1000-CC1 Page
SM-KS-800-CC1 Page
SM-KS-150-CC1 Page
SMC-400-CC-WT-FB1 Page
SMC-340-CC-WT-FB1 Page
SMC-250-CC-WT-FB1 Page
SMC-160-CC-WT-FB1 Page
SMC-120-CC-WT-FB1 Page
SMC-080-CC-WT-FB1 Page
SMC-400-CC-WT1 Page
SMC-080-CC-WT1 Page
SM-8121 Page
SM-7121 Page
SMC-800-CC-FB1 Page
SMC-225-CC-FB1 Page
SMC-408-CC-FB1 Page
SM-120-CC-WT-FB1 Page
SMC-8000-CC1 Page
SMC-5000-CC1 Page
SMC-3600-CC1 Page
SMC-1800-CC1 Page
SMC-2520-CC1 Page
Desktop Test Chamber1 Page
HAST Test Chmaber1 Page
Battery Test Chamber1 Page
Ozone Aging Test Chamber1 Page
Rain Test Chamber IPX21 Page
CLIMATIC TEST CHAMBER1 Page
SM-22-CC1 Page
UV Test Chamber(UV-600)1 Page
UV Test Chamber1 Page
Thermal Shock Chamber1 Page
Rain Test Chamber1 Page
Salt Spraying Chamber1 Page
2018 sanwood29 Pages
SANWOOD Brochure24 Pages
Compagny introduction42 Pages
Archived catalogs
Rain Test Chamber IPX91 Page
Rain Test Chamber IPX781 Page
Rain Test Chamber IPX121 Page
Ozone Aging Chamber1 Page
AGREE Test Chamber1 Page
- Sanwood oven
- Sanwood testing machine
- Sanwood chamber oven
- Sanwood electric oven
- Heat treatment kiln
- Measuring machine
- Sanwood temperature test chamber
- Material test machine
- Automated testing machine
- Sanwood climate chamber
- Sanwood quality control test chamber
- Sanwood computer-controlled testing machine
- Sanwood humidity test chamber
- Sanwood drying oven
- Sanwood compression testing machine
- Laboratory kiln
- Vertical testing machine
- Sanwood incubator