Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Sanwa Electric Instrument
  3. YX-361TR

YX-361TR

YX-361TR
1 / 1 PageView full catalog

YX-361TR

Product catalog summary
General Specifications:
The document outlines the specifications for two models of Sanwa Analog Multitesters: YX360TRF and YX-361TR. Both models adhere to safety standard IEC61010-1(EN61010-1) 2001-02, with a maximum category rating of CAT.III 600V and CAT.II DC1000V / AC750V. They are designed to operate at altitudes of 2,000m or below and have a pollution degree of II. The withstand voltage is 6kV AC for one minute between the input terminal and the case.
Environmental Conditions:
Calibration temperature and humidity are set at 23±2°C, with a relative humidity of 45-75%RH. Operating conditions range from 0 to 40°C (or 43°C for YX-361TR) with a maximum humidity of 80%RH, while storage conditions range from -10 to 50°C with a maximum humidity of 70%RH. No condensation is allowed in any condition.
Power and Dimensions:
Both models use R6 (1.5V) batteries, with the YX-361TR also requiring a 6F22 (9V) battery. The YX360TRF measures 159.5 × 129 × 41.5mm and weighs approximately 320g, while the YX-361TR measures 150 × 100 × 37mm and weighs approximately 290g.
Accessories:
Standard accessories include test leads and an instruction manual. Optional accessories for both models include HV probes, clip adapters, and hFE probes, with the YX-361TR also offering a carrying case.
Measurement Capabilities:
The document details various measurement ranges and accuracies for DC voltage (DCV), AC voltage (ACV), direct current (DCA), capacitance, and decibels (dB). The YX360TRF offers a DCV range from 0.1V to 1000V, while the YX-361TR provides a range from 0.1V to 1000V. Both models have specific input impedance values and accuracy percentages for different measurement ranges.
Additional Features:
The YX-361TR includes an LED for continuity checks and specific terminal voltage drops. Both models require optional probes for certain measurements, such as high voltage (HV) and hFE.
See more

Catalog excerpts

YX-361TR-1

SANWA ANALOG MULTITESTER YX360 TRF/ YX-361TR General Specifications YX360TRF Meter structure Standard calibration temperature / humidity Operating temperature / humidity Storage temperature / humidity Battery (built-in) fuse (built-in) Withstand voltage 6kV AC (1 min.) between input terminal and case Environmental condition Altitude 2,000m or below, pollution degree II Dimensions / weight Test lead (TL-61T), Hand strap, Instruction manual Test lead (TL-61), Instruction manual HV probe (HV-10T), Clip adapter (CL-11, TL-8IC), hFE probe (HFE-6T) HV probe (HV-10), Clip adapter (CL-11, TL-8IC), hFE probe (HFE-6), Carrying case (C-YS) Accessories Optional accessories Measuring range Input impedance 9k /V 30Hz ~ 100kHz within ±3% f.s. (AC10V) Center value 20 , Max. Value 2k Release voltage 3V 1 range / 0 ~ 15mA at 10 range / 0 ~ 1.5mA at 100 range / 0 ~ 150uA at 1k range / 0 ~ 1.5uA at 100k range 1000 at Optional probe HV-10T is necessary Optional probe HFE-6T is necessary *1: Not including the resistance of fuse. / *2: Pointer indication of the maximum move by charged current in the capacitor. Specification: YX-361TR Measuring range ±3% of full scale ±4% of full scale (10V or below) Terminal voltage drop 250mV Function DCV DCV (NULL) ACV DCmA 0 ~ 0.2 ~ 2k at 1 range, center 20 0 ~ 2 ~ 20k at 10 range, center 200 0 ~ 20 ~ 200k at 100 range, center 2k 0 ~ 200 ~ 2M at 1k range, center 20k 0 ~ 2k ~ 20M at 10k range, center 200k LED for continuity check at 1range (Emitting light at 10 dB LI LV Battery check HV (DC high voltage) Current across test pins 1k range / 0 ~ 1.5mA at 100 range / 10 range / 0 ~ 150mA at 1 range range 3V ~ 0V (Reverse of LI scale) 0 ~ 1.5V ±4% of full scale (10V or below) ±5% of arc ±5% of arc ±5% of full scale Dempa Bldg, 4-4 Sotokanda 2-Chome Chiyoda -ku, Tokyo 101-0021, Japan Tel: + 81- 3 -3251- 0941 Fax : + 81- 3 - 3256 - 9740 Input impedance 9k / V 30Hz ~ 100kHz ±1dB 10V or below 40Hz ~ 30kHz ±3% Current across terminals while object is measured. Voltage applied across terminals while Load current 0.25A Optional probe HV-10 is necessary

 Open the catalog to page 1

All Sanwa Electric Instrument catalogs and technical brochures

  1. CD5001
    CD5001

    2  Pages

  2. General Catalog
    General Catalog

    27  Pages

  3. LP10
    LP10

    1  Page

  4. KD3
    KD3

    1  Page

  5. LX20
    LX20

    1  Page

  6. TH20
    TH20

    1  Page

  7. TH1
    TH1

    1  Page

  8. TH3
    TH3

    1  Page

  9. DM508S
    DM508S

    1  Page

  10. PDM5219S
    PDM5219S

    1  Page

  11. HG561H
    HG561H

    4  Pages

  12. DLC460F
    DLC460F

    1  Page

  13. DCM600DR
    DCM600DR

    2  Pages

  14. DCL31DR
    DCL31DR

    1  Page

  15. DCM660R
    DCM660R

    2  Pages

  16. DCM60R
    DCM60R

    1  Page

  17. DCL1200R
    DCL1200R

    2  Pages

  18. DCM-22AD
    DCM-22AD

    1  Page

  19. DCL1000
    DCL1000

    2  Pages

  20. EM7000
    EM7000

    1  Page

  21. CD800a
    CD800a

    1  Page

  22. RD700
    RD700

    1  Page

  23. PC20
    PC20

    1  Page

  24. PC720M
    PC720M

    2  Pages

  25. PC700
    PC700

    2  Pages

  26. CAM600S
    CAM600S

    2  Pages

  27. AP33
    AP33

    1  Page

  28. PM11
    PM11

    1  Page

  29. CD732
    CD732

    1  Page

  30. General Catalog 2016 version
    General Catalog 2016 version

    34  Pages

  31. KIT-8D
    KIT-8D

    2  Pages

  32. PC510a
    PC510a

    1  Page

  33. PC500a
    PC500a

    1  Page

  34. PC5000 a
    PC5000 a

    1  Page

  35. general cata 2013
    general cata 2013

    34  Pages

Archived catalogs

  1. SANWA GENERAL CATALOG
    SANWA GENERAL CATALOG

    26  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.