DIGITAL MULTIMETER This instrument is a portable multimeter designed for the measurement of low currentcircuit. Measurements such as a small communications equipment and consumer electronics products, of course, is quite useful in such as a circuit analysis. ●4000 count ●PCLink7 (separately available software) allows you to download logged data into your PC with USB optical communication unit(KB-USB20). ●Holster for holding the test lead or hanging it from the wall ●AC adapter(separately available power supply, AD-72AC) SPECIFICATIONS DCV ACV DCA ACA Resistance Capacitance Continuity Diode test Measuring method Display Range selection Over display Polarity Battery low warning Sampling rate AC measuring method Accuracy assurance temperature / humidity Operating temperature / humidity Storage temperature / humidity Environmental condition Power consumption Continuous use time Bandwidth Fuse Battery Size / Mass Standard accessories included Δ∑ method 4000 count Auto and manual ranges "O.L" is displayed(except DC/AC10A, DC 1000V, AC750V ranges) Automatic selection(only " - " is displayed) Battery( ) mark lights when the internal battery's power is low 3 times / sec Average value method (Convert average value to effective value) 23℃±5℃, below 80%RH No condensation 540℃, 531℃, 80%RH(Max) No condensation -10℃50℃, below 70%RH No condensation Altitude 2000m or below, pollution degree II 7mW at DCV About 150 hours at DCV 40500Hz(below 500V), 401kHz(ACA) 0.5A/250V 1.5kA φ5.0x20mm 12.5A/250V 125A φ6.3x32mm R6 x 2 H167 x W90 x D48mm / 330g Test lead(TL-21a), Holster(H-70), Instruction manual Dempa Bldg, 4-4 Sotokanda 2-Chome, Chiyoda-Ku, Tokyo 101-0021 Japan Tel:+81-3-3251-0941 Fax:+81-3-3256-9740 A battery for monitoring has been installed prior to shipment from the factory. It may be discharged before the expiration of the described battery life. This battery is used to check the functions and performance of the product.Specifications and external appearance of the product described above may be rev