VOLTAGE DETECTOR This instrument is a pen-shaped voltage detector that can check jacketed electrical wires and bare wires that use AC voltage in live wire conditions. ●Detection with a loud beep and blinking LED ●Slim, easy-to-hold pen-shaped design ●Sensitivity switchable between HIGH and LOW ●Safety design equipped with a power LED SPECIFICATIONS Detectable voltage range Detection indicator Volume Light intensity Dielectric strength Measuring range 80 to 600V AC, 50/60Hz HIGH:Works with IV2 mm jacketed electrical wire or equivalent LOW:Works with bare live part Red and green LEDs blinks; beep sound 50dB or more at 50cm distance from beep emitter Visible at 50cm distance from light emitting section with light intensity of 8,000lux 1 min. At 2000V AC, from sensor to grip Low battery warning Operating temperature/humidity Battery Size/Mass Standard accessories included Beep sounds for 2 sec. when voltage falls below approx. 2.4V and then power is turned OFF Temperature: -10℃ to 45℃; humidity: 80% RH or less (no condensation) LR44 (1.5V) X 2 H134 x W20 x D18mm / Approx. 20g LR44 (alkaline button battery) X 2, Instruction manual Dempa Bldg, 4-4 Sotokanda 2-Chome, Chiyoda-Ku, Tokyo 101-0021 Japan Tel:+81-3-3251-0941 Fax:+81-3-3256-9740 A battery for monitoring has been installed prior to shipment from the factory. It may be discharged before the expiration of the described battery life. This battery is used to check the functions and performance of the product.Specifications and external appearance of the product described above may be revised for modification without prio