ANALOG MULTITESTER This instrument is a highly sensitive "FET electronic tester" having the DC voltage function of which the internal resitance is as high as 2.512MΩ, and also the DC current function with the 0.12μA range. This is used at small communications equipments, home electric appliances, voltage of lump line, and measurement of various types of batteries. You can also measure P-P value(the value between positive and negative peak values os sine wave alternating current) and very small electric current. ●Zeto center meter(NULL) of DC Voltage and DC Current ●The frequency characteristic of AC low voltage ranges(3V and 12V) is 40Hz1MHz(sine wave AC) ●The Vp-p of triangular-wave, square-wave over 20% duty cycle voltages of waveforms can also be measured(at 3V range) ●Wide ohm range 0.2Ω200MΩ SPECIFICATIONS DCV ±DCV ACV rms(50/60Hz) ACV P-P DCA DCA(NULL) ACA Resistance dB Meter type AC rectifier form Meter drive circuit Accuracy assurance temperature / humidity Operating temperature / humidity Storage temperature / humidity Operating environment Battery life Bandwidth Battery Fuse Size / Mass Standard accessories included Best accuracy ±3% of full scale ±7% of full scale ±3% of full scale ±5% of full scale ±6% of full scale ±6% of full scale ±3% of full scale ±7% of full scale ±3% of full scale ±3% of arc ±3% of arc Internal magnet, Taut-band meter(48μA) p-p voltage rectifier form FET differential amplifier 23±2℃ 75%RH max. No condensation 540℃, Humidity must be as below, and No condensation 531℃, 80%RH(Max). 31<40℃, 8050%RH(decreasing linearly) -10 to 50℃, 70% RH or less, No condensation Altitude 2000 m or less, indoor use, environmental pollution degree II Continuous 500 hours(When power switch is ON/input terminals open) 40Hz1MHz(below 12V range) R6P x 2, 6F22 x 1 Φ5.0 x 20mm ceramic(250V / 0.5A) Φ5.0 x 20mm ceramic(250V / 6.3A) H165 x W106 x D46mm / approx.375g Test lead(TL-21a), Instruction manual, Spare fuse(250V / 0.5A) Dempa Bldg, 4-4 Sotokanda 2-Chome, Chiyoda-Ku, Tokyo 101-0021 Japan Tel:+81-3-3251-0941 Fax:+81-3-3256-9740 A battery for monitoring has been installed prior to shipment from the factory. It may be discharged before the expiration of the described battery life. This battery is used to check the functions and performance of the product.Specifications and external appearance of the product described above m