CLAMP METER This meter is useful for measuring the current of electrical lines, appliances and power supply facilities operating on low voltages in the ranges of CAT. III environment. ●True RMS ●Low cost & DMM functions ●Data hold function SPECIFICATIONS ACA ACV Resistance Continuity Measuring range 199.9/600A 199.9/600V 199.9Ω Buzzer sounds at less than 100Ω Operation method AC measuring method Sampling rate Display Range selection Battery low warning Operating temperature / humidity Storage temperature / humidity Continuous use time Power consumption Safety standards Bandwidth Clamp diameter / Conductor size Battery Size / Mass Standard accessories included Δ-Σ method True RMS 2 times / sec 1999 count Auto Battery ( ) mark lights at approx. 2.2V or below 0℃40℃, below 80%RH No condensation -10℃60℃, below 70%RH No condensation About 250 hours Approx. 5.0mW IEC61010-1, IEC61010-2-030 CAT.III 300V / II 600V IEC61010-2-032, IEC61010-2-033, IEC61010-31 50400Hz 25mm / 10 x 30mm R03(UM-4) or AAA x 2 187 x 50 x 29mm / 210 Test lead(TL-21a), Carrying case(C-DCM60L), Instruction manual A battery for monitoring has been installed prior to shipment from the factory. It may be discharged before the expiration of the described battery life. This battery is used to check the functions and performance of the product.Specifications and external appearance of the product described above may be revised for modification without prior notice. Dempa Bldg, 4-4 Sotokanda 2-Chome, Chiyoda-Ku, Tokyo 101-0021 Japan Tel:+81-3-3251-0941 Fax:+81-3-3256-9740