DCL31DR
1Pages

Catalog excerpts

CLAMP METER This instrument is an AC/DC clamp meter with RMS respons that allow you to measure the current range specified in IEC61010-1 CAT. III 300V. It is suitable for measuring the current of low-voltage power lines and electrical appliances. ●Compact pocket size ●TRUE RMS conversion ●Auto power off ●Data hold / Peak hold ●Backlight ●Zero setting Measuring range 60/400A ACA 60/400A DCA Operation method Display Range selection Battery low warning Sampling rate AC measuring method Operating temperature / humidity Storage temperature / humidity Continuous use time Power consumption Safety standards Bandwidth Clamp diameter Battery Size / Mass Standard accessories included Δ-Σ method 6000 count Auto Battery( ) mark lights at approx. 2.3V or below 2 times / sec 1 time / sec with DC+AC function True RMS Temperature 5℃40℃ Relative humidity Max. 80%RH at 5℃31℃ Decreases linearly through 80%RH to 50% at 31℃ 40℃No condensation -10℃40℃:Max 80%RH No condensation 40℃50℃:Max 70%RH No condensation Approx. 35 hours(Backlight extinguished) Approx. 25mA IEC61010-1, IEC61010-2-030 CAT.III 300V / II 600V, IEC61010-2-032 5060Hz(ACA : 2.0%+5), 45 400Hz(ACA : 3.0%+10), 5060Hz(ACA+DCA : 2.5%+10), 45 400Hz(ACA+DCA : 3.5%+15) 25mm LR03 or AAA x 2 H145 x W54 x D31mm / 120g Carrying pouch(C-DCL10), Instruction manual Dempa Bldg, 4-4 Sotokanda 2-Chome, Chiyoda-Ku, Tokyo 101-0021 Japan Tel:+81-3-3251-0941 Fax:+81-3-3256-9740 A battery for monitoring has been installed prior to shipment from the factory. It may be discharged before the expiration of the described battery life. This battery is used to check the functions and performance of the product.Specifications and external appearance of the product described above may be revised for m

Open the catalog to page 1