*mydirectindustry

DCL1200R

Product catalog summary

Overview: The document provides technical specifications for the SANWA Digital Clamp Meter DCL series, specifically models DCL1000 and DCL1200R. These meters are designed for measuring AC current and voltage with True RMS reading capabilities, suitable for nonsinusoidal waveforms.

Specifications:

Weight and Dimensions: The clamp meter is lightweight at approximately 290g and has dimensions of 238mm (L) x 95mm (W) x 45mm (H).
Measurement Capabilities: The DCL1000 can measure up to AC 1000A, while the DCL1200R can measure up to AC 1200A. Both models support a range of voltage and resistance measurements with varying accuracies.
Display and Sampling: The meters feature an LCD with a sampling rate of 3 to 5 times per second, depending on the model.
Power Supply: Powered by two R03 1.5V batteries, with a typical battery life of approximately 120 hours.
Environmental Conditions: Operates within a temperature range of 5℃ to 40℃ and a maximum relative humidity of 80%.
Safety Standards: Complies with IEC61010-2-032 (2002), CAT.Ⅲ 600V, and other relevant standards.

Features:

True RMS Reading: Ensures accurate measurement of nonsinusoidal waveforms.
Non-Contact Voltage Detection: Includes an EF function for detecting voltage without direct contact.
Data Hold Function: Allows users to hold readings easily and precisely.
Auto Power Off: The device automatically powers off after a set period to conserve battery life.

Accuracy and Range:

AC and DC Voltage: Various ranges with accuracies specified in percentage of reading plus digits.
Resistance and Continuity: Includes a buzzer for continuity checks with specified ranges and accuracies.
Capacitance Measurement: Available with auto range only, with specific accuracy conditions.

Additional Information: The document notes that specifications and external appearances may be revised without prior notice. It also provides contact information for SANWA Electric Instrument Co., Ltd., based in Tokyo, Japan.

Catalog excerpts

Light Weight DIGITAL CLAMP METER DCL series "Approx. 30% lighter than our equivalent models" Non Contact Voltage detection function (EF function) New clamp meter designed to be lightweight for por table use True RMS reading to measure nonsinusoidal waveform AC current and voltage Can measure up to AC1200A (MAX 2000A) Large data hold button to hold reading easily and precisely

Open the catalog to page 1

SANWA DIGITAL CLAMP METER DCL series Measuring Range and Best Accuracy : General Specifications Model Range selection Over-range indication Mark lights or flickers at about 2.4V or below Storage Temperature / Humidity -20 , 70%RH or below (with battery removed) BANDWIDTH INPUT IMPEDANCE Diode Test INPUT IMPEDANCE Open Circuit Voltage : Approx. 1.6VDC Test Current : 0.4mA (Typical) Resistance / Continuity Check (600 ) EF function (Non contact voltage detection) Dempa Bldg, 4-4 Sotokanda 2-Chome Chiyoda-ku, Tokyo 101-0021, Japan Tel: 81-3-3251-0941 Fax: 81-3-3256-9740 Specifications and external...

Open the catalog to page 2

All Sanwa Electric Instrument catalogs and technical brochures

Archived catalogs

SANWA GENERAL CATALOG
26 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list