*mydirectindustry

DCL1000

Product catalog summary

Overview: The document provides technical specifications for the SANWA Digital Clamp Meter DCL series, specifically models DCL1000 and DCL1200R. These meters are designed for measuring AC current and voltage with True RMS reading capabilities, suitable for nonsinusoidal waveforms.

Specifications:

Weight and Design: The clamp meter is lightweight at 290g, approximately 30% lighter than equivalent models, making it portable.
Measurement Capabilities: The DCL series can measure up to AC1200A (MAX 2000A) and features a large data hold button for easy reading retention.
Non-Contact Voltage Detection: Equipped with an EF function for non-contact voltage detection.
Display and Sampling: The meters use an LCD with a sampling rate of 3 to 5 times per second, depending on the model.
Operating Conditions: Suitable for temperatures between 5℃ to 40℃ with a maximum relative humidity of 80%.
Power Supply: Operates on two R03 1.5V batteries with a typical power consumption of 2.2mA to 2.8mA.
Safety Standards: Complies with IEC61010-2-032 (2002), CAT.Ⅲ 600V, and IEC61010-031 standards.

Model-Specific Details:

DCL1000: Measures AC current up to 1000A with a bandwidth of 50Hz/60Hz. It has a resistance measurement range up to 40.00MΩ.
DCL1200R: Measures AC current up to 1200A with True RMS AC coupling. It features a crest factor for full and half-scale measurements and a frequency range of 50Hz to 500Hz.

Additional Features:

Auto Power Off: The device powers off automatically after approximately 30 minutes to conserve battery life.
Continuity and Diode Testing: Includes a buzzer for continuity checks and a diode test function with specific open circuit voltages.
Capacitance Measurement: Capable of measuring capacitance with specified accuracy ranges.

Conclusion: The SANWA DCL series clamp meters are versatile tools for electrical measurements, offering high accuracy, safety compliance, and user-friendly features for professional use.

Catalog excerpts

Light Weight DIGITAL CLAMP METER DCL series "Approx. 30% lighter than our equivalent models" Non Contact Voltage detection function (EF function) New clamp meter designed to be lightweight for por table use True RMS reading to measure nonsinusoidal waveform AC current and voltage Can measure up to AC1200A (MAX 2000A) Large data hold button to hold reading easily and precisely

Open the catalog to page 1

SANWA DIGITAL CLAMP METER DCL series Measuring Range and Best Accuracy : General Specifications Model Range selection Over-range indication Mark lights or flickers at about 2.4V or below Storage Temperature / Humidity -20 , 70%RH or below (with battery removed) BANDWIDTH INPUT IMPEDANCE Diode Test INPUT IMPEDANCE Open Circuit Voltage : Approx. 1.6VDC Test Current : 0.4mA (Typical) Resistance / Continuity Check (600 ) EF function (Non contact voltage detection) Dempa Bldg, 4-4 Sotokanda 2-Chome Chiyoda-ku, Tokyo 101-0021, Japan Tel: 81-3-3251-0941 Fax: 81-3-3256-9740 Specifications and external...

Open the catalog to page 2

All Sanwa Electric Instrument catalogs and technical brochures

Archived catalogs

SANWA GENERAL CATALOG
26 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list