Citadel Series Catalogue

2 Citadel industrial switches to work in the most severe circumstances; Robust, solid, impact-resistant, dustand waterproof. Citadel enclosures are manufactured of first-class materials such as neoprene, polyester or noryl. ROBUST INDUSTRIAL SWITCHGEAR Santon Switchgear supplies Citadel switches: Plastic enclosures in which a reliable Santon switch is mounted, intended for the most diverse applications and circumstances. The Citadel switch isolators are in accordance with EN 60204, VDE 0113 and NEN 1010-5 article 537 and up to category of use AC 23A/DC 23 in accordance with IE60497- 1 and 3....

Citadel switches with Button and front plate. THE WALL MOUNTING CITADEL SWITCHES The Citadel range standard is supplied with a Santon industrial switch. It has a solid construction, electrically with large dimensions, shock and vibration-proof and features self-cleaning wiping contacts. The switches meet the requirements of IEC 947-3, VDE 0660, Lloyd’s, Veritas and Germanischer Lloyd. There are 2 types of spring works: - with a normal switch momentum, a semi-independent control, intended for alternating current: the switch then has one continuous steel axle, which forces a switch. - with quick...

CUSTOMER-BUILT SOLUTIONS Santon has been specialising on the manufacture of packet switches on an industrial quality level for many years. With the experience gathered, Santon can develop special versions for you. Bespoke work is the speciality of Santon. THE LOCKING Often a padlock locking is required. Santon’s Citadel switches offer you the selection from the following: - robust version made of glass fibre filled noryl: a yellow ring a with a red button, lockable with three padlocks - he same version, however with a grey ring and a button (pot lyamide) - version with a simple, very effective...

LIGHT SWITCH A two-pole switch, such as a light switch, in a noryl enclosure of a ‘0K’ type. WALL SOCKET A two-pole wall socket with safety ground, 16A-240V AC with a screw cap; the enclosure is also made of noryl. Both with a closed cover as well as with a connected plug with screw ring in the water tightness class IP 66. Top right: Citadel ‘7K’ case with directly engraved position indications. Bottom left: Direct current emergency switch in special colour. Bottom centre: Push button in ‘1K’ enclosure. Bottom right: Switch in ‘1K’ enclosure with air relief valve. Control knob operated motor...

CITADEL: ALSO FOR HIGHLY SPECIALISED APPLICATIONS The Citadel range features several special switches. Just as extremely solid as the packet switches and just as maintenance free, but intended for specific applications. Primarily intended for the safety of your personnel and safeguarding your capital goods. THE MISALIGNMENT SWITCH (SLS) For securing conveyor belts, with warning and disconnection contacts. The enclosure of type ‘6K’ is made of glass fibre filled noryl and is equipped with a built-in terminal strip. The shock and vibration resistant Santon switch with self-cleaning wiping contacts...

Pull cord emergency switch. THE PULL CORD EMERGENCY SWITCH (TKN) The case of type ‘6K’ with a flat cover is made of glass fibre filled noryl. A built-in terminal strip simplifies the connection of the TKN. The control arm and the bearing housing are constructed in a very solid manner and manufactured of stainless steel; they are therefore suitable for the most severe circomstances. The shock and vibration resistant packet switch is equipped with 2 make and 2 break contacts; it is fitted with a double mechanism. This ensures a large switch momentum, providing a high degree of operational safety....

Santon Holland bv, Rotterdam Santon Switchgear Ltd, Newport Santon GmbH, Nettetal Santon Spain, Madrid E-mail: [email protected] E-mail: [email protected] E-Mail: [email protected] E-Mail: [email protected] Internet: www.santonswitchgear.com Internet: www.santonswitchgear.com Internet: www.santonswitchgear.com Internet: www.santonswitchgear.com EN-ISO 9001 EN-ISO 9000:2000 EN-ISO 9001 EN-ISO 9001