RCC series 90-degree index in 0.4 seconds

Overview Exclusive Zero Backlash Structure Internal Construction of the Roller Follower Needles T Turret (output) O Outer raceway R Roller gear cam surface Roller gear cam (input) R Preload mechanism Rolling contact Preload ■ No backlash (play). ■ Power transferred by rolling contact eliminates wear. ■ High accuracy and good efficiency. ■ Preloadable for high rigidity. Low Maintenance and Excellent Price Performance Consistent Long-term Accuracy without Backlash Adjustment. Cost Comparison with a Worm Gear Rotary Table Offers Long-term Use Low Maintenance Initial Cost versus Annual Maintenance...

Table reference bore diameter mm 065+0'03 075+0-03 0110 +0-035 0165+g-04 0200+g-046 *1 Depends on which motor is mounted. Allowable axial load N 12740 15789 37420 56000 74220 Allowable load Maximum output torque*2 N*m 287 524 1003 1481 2675 Allowable bending moment N • m 598 948 2210 3550 8135 *2 Maximum table speed and holding torque values are given for a FANUC motor. Contact Sankyo if you wish to use a different motor. Options Hydraulic clamper (N • m/6MPa) Built-in rotary joint (number of ports) External rotary joint...

Power Connector Encoder Connector Connector Model Number Use

Table center bore Table center bore Air purge outlet (Reverse side) Air purge outlet (Reverse side) Table center bore Air purge outlet (Reverse side) Table center bore Table center bore Air purge outlet (Reverse side)

Maximum actuation pressure OptionsRotary Joints Model/size RCC170 RCC200 RCC250 RCC320 RCC400 Actuation fluid: Hydraulic pressure 6MPa Actuation fluid: Air 0.7MPa The +1 indicates port in the center bore. ^2 Make sure to furnish a line filter in the air supply line. ^3 Under prolonged used, a small amount of actuation oil may leak from the oil port toward the adjacent air port. If possible, the adjacent ports should be left open for use as drain ports. External Out port dimensions

Support Table Product Code 1 SS150 Product code example: SS150-C-H165(For the RCC200, with hydraulic clamp) SS150-H150(For the RCC170, without hydraulic clamp) Specification Sheet SS150 SS210 Target Model RCC170 RCC200 RCC250 RCC320 RCC400 Precision RatingNo. Measurement 1 Straightness of table top 3 Runout of table reference bore 4 Perpendicularity between table top and reference surface for upright mounting Parallelism between rotary axis and guide blocks for reference surface for upright mounting 6 Deviation between rotary axis and guide blocks for reference surface for upright mounting...

Precautions／Service Network Notes on Air Supply CNC Circular Table comes standard equipped with an air purge outlet. (Use it to blow out condensation and coolant to prolong the life of electrical parts and prevent rust in the motor housing.) Supply clean air for the air purge by referring to the drawing shown below. Pressure setting: 0.02 MPa Air consumption: 15L/min CNC Circular Table uses an oil bath to protect the internal mechanisms and maintain reliability. Refill and perform oil changes regularly using the oil listed in the instruction manual. Grinding Machine Applications ■When used in...