DSS Series
1Pages

{{requestButtons}}

Catalog excerpts

DSS Series - 1

The DSS series is an indexable work-holding tombstone. Designed to be mounted on the pallet of machining centers, the DSS allows versa- tile maching without rechucking. The drive uses a roller gear cam mechanism for smooth rotation and self-locking in any position. The output shaft is held rigid enough for heavy grinding and finishing work. Furthermore, the unit is self contained and can be mounted on pallets in multiple places, each without sensors or other means of drive sourc- es. To turn, attach the special bar to the main spindle and use the arc interpolation feature of the NC to rotate the cam follower on the disc. Five different surface: This cam operated unit allows machining to five different surfaces with tour horizontal machining Zero backlash: The roller gear cam mechanism's zero backlash design provides high accuracy indexing motion. Our custom designed, heavy duty cam followers provide the unit with a high degree of torsional stiffness for heavy duty machining applications. Zero contact(Remote unit): Since the SANDEX DSS unit does not require an independent input drive source, signal wire or control cable. It is easily installed on the NC pal- let system for easy spindle access and hook-up. #^ Indexable work-holding tombstone

Open the catalog to page 1

All SANKYO catalogs and technical brochures

  1. RCC Series

    8 Pages

  2. RW series

    8 Pages

  3. SPC Series

    2 Pages

  4. TCU Series

    2 Pages

  5. RSD Series

    1 Pages

  6. EX Series

    1 Pages

  7. DST Series

    1 Pages

  8. VS-s Series

    2 Pages

  9. CNC Series

    16 Pages

  10. ECO Series

    32 Pages

  11. RU Series

    28 Pages

  12. RE series

    20 Pages

  13. SANDEX

    8 Pages

  14. RollerDrive

    28 Pages

  15. Do series

    7 Pages

  16. DT, DTR series

    11 Pages

  17. RY series

    16 Pages

  18. RA series

    32 Pages

Archived catalogs