*mydirectindustry

UCNBK200

Product catalog summary

General Description:
The UCNBK Aerial Cam Unit is constructed with a robust box structure that enhances rigidity and supports the slider. It includes a V-shaped guide and is available in mounting widths of 65mm, 100mm, and 200mm.

Specifications:

Key Specification: Comes with a quantity of 1 M8 x 15 bolt.
Options: Metric Key Specification (-KA) available for UCNBK100/200 and UCNBK65 models.

Structure and Assembly/Disassembly:

Disassembly: Involves loosening hexagon socket head bolts and removing plates and dowel pins.
Assembly: Reverse of disassembly, ensuring components are free of foreign matter and serial numbers match.

Components:

Cam Slider, Cam Driver, Cam Holder: Made of FC250 with Graphite.
Upper Plate, Positive Return Follower, Stopper Plate, Cam Bottom Slide Plate: Made of S45C with Graphite.
Spring Guide Pin: Made of SCM435.
Coil Spring: TM30p175.
Stopper: Made of Urethane.
Cam Bottom Guide Plate, Lower Plate, Driver Plate: Made of Bronze with Graphite.
Screw Plug: S45C M12.

Performance and Durability:

Spring: TM30-175 with a constant of 31.33N/mm, durable for 1,000,000 strokes.
Working Force: Standard and allowable working forces specified for one million and 300,000 strokes, respectively.

Options and Ordering:

Option Code K: Includes a key for the holder, not assembled to the main unit.
Detailed key specifications available on page 1035.

Catalog excerpts

Aerial Cam Unit General Description of UCNBK OUTLINE OF UCNBK Y High rigidity because of the box structure to keep the qUCNBK Structure and Assembly / Disassembly slider. Y V-shaped guide. Y 100 and 200mm are available for the mounting width. 65, UCNBK65,200:y UCNBK100:u UAssembly method of UCNBK 9 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 1) Loosen hexagon socket head bolt ( ) and remove plate (UCNBK65:!2 UCNBK100:!4 UCNBK200:!3) and dowel pin ( ). 2) Loosen hexagon socket head bolt ( ) and remove stopper plate (UCNBK65,200:y UCNBK100:u). 3) Pull and remove cam slider (q) from cam holder (e) to the rear. Disassembly method of UCNBK U U Metric Key Specification (-KA) 14 UCNBK100/200 LKE25-32-50 (with 3-M8 p 15 bolts) der is attached. embled to the main unit.) 1) Assemble components in the reverse order of disassembly. YMake sure that there is no foreign matter on the sliding area and assemble components. YThe clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly. YWhen cam is disassembled and then reassembled, please do not forget to assemble all bolts provided. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Open the catalog to page 1

Aerial Cam Unit( FOR PIERCE AND FLANGE Catalog No. (W) (K)UCNBK 200 “ 00 Option Code Order UCNBK200 - 00 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-175 (4 piece) •Spring constant 31.33N/mm (3.19kgf/mm) •Guideline of spring durability 1,000,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

Open the catalog to page 2

Aerial Cam Unit ( FOR PIERCE AND FLANGE Option Code Order UCNBK200 - 05 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. ^For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-175 (4 piece) •Spring constant 31.33N/mm (3.19kgf/mm) •Guideline of spring durability 1,000,000 strokes UCNBK 200 1099 1100 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Open the catalog to page 3

Aerial Cam Unit( FOR PIERCE AND FLANGE Catalog No. (W) (K)UCNBK 200 - 10 Option Code Order UCNBK200 - 10 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-175 (4 piece) •Spring constant 31.33N/mm (3.19kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved....

Open the catalog to page 4

Aerial Cam Unit ( FOR PIERCE AND FLANGE Catalog No. (W) (K)UCNBK 200 — 15 Option Code Order UCNBK200 - 15 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-175 (4 piece) •Spring constant 31.33N/mm (3.19kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

Open the catalog to page 5

Aerial Cam Unit( FOR PIERCE AND FLANGE Catalog No. (W) (K)UCNBK 200 — 20 Option Code j Order UCNBK200 - 20 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-150 (4 piece) •Spring constant 36.55N/mm (3.73kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

Open the catalog to page 6

Aerial Cam Unit ( FOR PIERCE AND FLANGE Catalog No. (W) (K) UCNBK 200 - 25 Option Code j Order UCNBK200 - 25 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-150 (4 piece) •Spring constant 36.55N/mm (3.73kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

Open the catalog to page 7

Aerial Cam Unit( FOR PIERCE AND FLANGE Catalog No. (W) (K)UCNBK 200 - 30 Option Code Order UCNBK200 - 30 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-125 (4 piece) •Spring constant 43.86N/mm (4.47kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

Open the catalog to page 8

Aerial Cam Unit ( FOR PIERCE AND FLANGE Addition c \UCNBK200-35 ■Cam Diagram Travel S Option Code Order UCNBK200 - 35 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. For detailed specification of the key, refer to page 1035. ■Spring Diagram •Spring used TM30-125 (4 piece) •Guideline of spring durability 1,000,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Open the catalog to page 9

UCNBK200

UCNBK200

Catalog excerpts

All Sankyo Oilless Industry catalogs and technical brochures