Aerial Cam Unit General Description of UCNBK OUTLINE OF UCNBK Y High rigidity because of the box structure to keep the qUCNBK Structure and Assembly / Disassembly slider. Y V-shaped guide. Y 100 and 200mm are available for the mounting width. 65, UCNBK65,200:y UCNBK100:u UAssembly method of UCNBK 9 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 1) Loosen hexagon socket head bolt ( ) and remove plate (UCNBK65:!2 UCNBK100:!4 UCNBK200:!3) and dowel pin ( ). 2) Loosen hexagon socket head bolt ( ) and remove stopper plate (UCNBK65,200:y UCNBK100:u). 3) Pull and remove cam slider (q) from cam holder (e) to the rear. Disassembly method of UCNBK U U Metric Key Specification (-KA) 14 UCNBK100/200 LKE25-32-50 (with 3-M8 p 15 bolts) der is attached. embled to the main unit.) 1) Assemble components in the reverse order of disassembly. YMake sure that there is no foreign matter on the sliding area and assemble components. YThe clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly. YWhen cam is disassembled and then reassembled, please do not forget to assemble all bolts provided. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( FOR PIERCE AND FLANGE Catalog No. (W) (K) UCNBK 100 “ 00 Option Code For detailed specification of the key, refer to page 1035. ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. □ Bolts for assembly are not indicated. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit ( FOR PIERCE AND FLANGE Option Code For detailed specification of the key, refer to page 1035. Order UCNBK100 - 05 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. □ Bolts for assembly are not indicated. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( FOR PIERCE AND FLANGE UCNBK 100 - 10 Option Code For detailed specification of the key, refer to page 1035. Order UCNBK100 - 10 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. □ Boltsfor assembly are not indicated. ■Spring Diagram •Spring used TM30-175 (2 piece) •Spring constant 31.3N/mm (3.19kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit ( FOR PIERCE AND FLANGE Catalog No. (W) (K)UCNBK 100 - 15 Option Code For detailed specification of the key, refer to page 1035. Order UCNBK100 - 15 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. □ Boltsfor assembly are not indicated. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( FOR PIERCE AND FLANGE Option Code ^For detailed specification of the key, refer to page 1035. Order UCNBK100 - 20 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. ■Spring Diagram •Spring used TM30-150 (2 piece) •Spring constant 36.55N/mm (3.73kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit ( FOR PIERCE AND FLANGE Catalog No. (W) (K)UCNBK 100 - 25 Cam Units Option Code For detailed specification of the key, refer to page 1035. Order UCNBK100 - 25 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. ■Spring Diagram •Spring used TM30-150 (2 piece) •Spring constant 36.55N/mm (3.73kgf/mm) •Guideline of spring durability 500,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All...

Aerial Cam Unit( FOR PIERCE AND FLANGE Option Code For detailed specification of the key, refer to page 1035. Order UCNBK100 - 30 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. □ Bolts for assembly are not indicated. ■Spring Diagram •Spring used TM30-125 (2 piece) •Guideline of spring durability 500,000 strokes UCNBK 100 1079 1080 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit ( FOR PIERCE AND FLANGE Option Code For detailed specification of the key, refer to page 1035. Order UCNBK100 - 35 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. 0 Bolts for assembly are not indicated. ■Spring Diagram •Spring used TM30-125 (2 piece) •Spring constant 43.86N/mm (4.47kgf/mm) •Guideline of spring durability 1,000,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( FOR PIERCE AND FLANGE Option Code For detailed specification of the key, refer to page 1035. Order UCNBK100 - 40 - K ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finish hole) for retainer. □ Bolts for assembly are not indicated. ■Spring Diagram •Spring used TM30-125 (2 piece) •Spring constant 43.86N/mm (4.47kgf/mm) •Guideline of spring durability 1,000,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.