Aerial Cam Unit - General Description of SULNC OUTLINE OF SULNC t Mounting width: 65mm. surface maximum extension is 150mm. t-shaped guide. V t orking Force (300,000 strokes) 14.7kN W tvailable angle is 0° to 25° at increments of 5° qStructure and Assembly/Disassembly of SULNC. q SULNC Specifications Mounting Surface W H Working Angle Spring Force N(kgf) Working Force kN(tonf) (300,000 strokes) method of SULNC 1) Remove hexagon socket head bolt ( ) and washer ( ), and remove stopper plate (t). 2)Pull and remove cam slider(w) from cam holder(q) to the rear. method of SULNC 1)Assemble components in the reverse order of disassembly. Y Make sure that there is no foreign matter on the sliding area and assemble components. Y The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly. Y When cam is disassembled and then reassembled, please do not forget to assemble all bolts provided. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit- General Description of SULNC( PIERCING LONG NOSE TYPE ) Durability test for 300,000 strokes: No problem Cam Units A long nose type cam slider may cause runout of the nose end due to wear. If run-out occurs, the product may have burrs. In a worst case, the punch may not fit with the button die, resulting in damage to the die. These may be attributable to wear resistance, accuracy of components and degree of total accuracy. Sankyo’s long nose type cam has achieved the durability test of 300,000 strokes to ensure higher quality product and customer satisfaction. (2) Panel...

Aerial Cam Unit( PIERCING LONG NOSE TYPE Addition CAD FILE ■Space for removing Cam Units Option Code Order SULNC65 - 00 - SC120 - N12 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used TL40-125(1 piece) • Spring Constant 42.3N/mm(4.31kgf/mm) •Guideline of spring durability 300,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( PIERCING LONG NOSE TYPE Addition CAD FILE SULNC 65 - 05 ■Space for removing Cam Units Option Code Order SULNC65 - 05 - SC120 - N12 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used TL40-125(1 piece) • Spring Constant 42.3N/mm(4.31kgf/mm) •Guideline of spring durability 300,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( PIERCING LONG NOSE TYPE Addition CAD FILE SULNC 65 - 10 ■Space for removing Cam Units Option Code Order SULNC65 - 10 - SC120 - N12 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used TL40-125(1 piece) • Spring Constant 42.3N/mm(4.31kgf/mm) •Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm Copyright © Sankyo Oilless Industry,...

Aerial Cam Unit ( PIERCING LONG NOSE TYPE Addition CAD FILE f A SULNC65-15 ■Space for removing Cam Units Option Code Order SULNC65 - 15 - SC120 - N12 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used TL40-125(1 piece) • Spring Constant 42.3N/mm(4.31kgf/mm) •Guideline of spring durability 300,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( PIERCING LONG NOSE TYPE Addition CAD FILE ■Space for removing Cam Units Option Code Order SULNC65 - 20 - SC120 - N12 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used TL40-125(1 piece) • Spring Constant 42.3N/mm(4.31kgf/mm) •Guideline of spring durability 300,000 strokes Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( PIERCING LONG NOSE TYPE Addition CAD FILE ■Space for removing Cam Units Option Code Order SULNC65 - 25 - SC120 - N12 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used TL40-125(1 piece) • Spring Constant 42.3N/mm(4.31kgf/mm) •Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved....