For Pierce and Flange Aerial Cam Unit General Description of SOUK ( OUTLINE OF SOUK High rigidity because of the box structure to keep the slider. 65, 100 and 200mm are available for the mounting width. Available angle is 0° to 70° at increments of 5°. ■SOUK Structure and Assembly / Disassembly ■Option of SOUK • Key Specification SOUK65/100/200 LKU25-100 (with 1 • Disassembly method of SOUK 1) Loosen hexagon socket head bolt (®) and remove plate (SOUK65:! SOUK100,200:!) and dowel pin (®). 2) Loosen hexagon socket head bolt (©) and remove stopper plate (©). 3) Pull and remove cam slider (O) from cam holder (©) to the rear. • Assembly method of SOUK 1) Assemble components in the reverse order of disassembly. •Make sure that there is no foreign matter on the sliding area and assemble components. •The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly. •When cam is disassembled and then reassembled, please do not forget to assemble all bolts provided. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Aerial Cam Unit( FOR PIERCE AND FLANGE Catalog No. (W) (K) Dowel Pin Hole Diameter) SOUK 100-00 ■■■Dowel pin prepared hole SOUK 100 - 00 - HK13 ■ Dowel pin hole h 13 (H7) for cam holder only SOUK 100 - 00 - HDK13 ■Dowel pin hole h13 (H7) for both holder and driver Option Code j^^jOrderSOUK100 - 00 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to page 943. 0 Bolts for assembly are not indicated. iSpaceforremoving...

Aerial Cam Unit( FOR PIERCE AND FLANGE 05 '"Dowel pin prepared hole 05 - HK13 " Dowel pin hole h 13 (H7) for cam holder only 05 - HDK13 "Dowel pin hole h13 (H7) for both holder and driver Option Code j^jOrderSOUK100 - 05 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to page 943. 0 Bolts for assembly are not indicated. iSpaceforremoving SOUK 100 977 978 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo...

Aerial Cam Unit( FOR PIERCE AND FLANGE 10 '"Dowel pin prepared hole 10 - HK13 " Dowel pin hole h 13 (H7) for cam holder only 10 - HDK13 "Dowel pin hole h13 (H7) for both holder and driver Option Code j^jOrderSOUK100 - 10 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to page 943. 0 Bolts for assembly are not indicated. iSpaceforremoving SOUK 100 979 980 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo...

Aerial Cam Unit( FOR PIERCE AND FLANGE □ Tolerances are from dowel pin finished hole 15 '"Dowel pin prepared hole 15 - HK13 " Dowel pin hole h 13 (H7) for cam holder only 15 - HDK13 "Dowel pin hole h13 (H7) for both holder and driver Option Code j^jOrderSOUK100 - 15 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to page 943. 0 Bolts for assembly are not indicated. iSpaceforremoving SOUK 100 981 982 Copyright © Sankyo Oilless Industry,...

Aerial Cam Unit( FOR PIERCE AND FLANGE □ Tolerances are from dowel pin finished hole 20 '"Dowel pin prepared hole 20 - HK13 " Dowel pin hole h 13 (H7) for cam holder only 20 - HDK13 "Dowel pin hole h13 (H7) for both holder and driver Option Code j^^jOrderSOUK100 - 20 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to page 943. 0 Bolts for assembly are not indicated. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright...

Aerial Cam Unit( FOR PIERCE AND FLANGE 25 '"Dowel pin prepared hole 25 - HK13 " Dowel pin hole h 13 (H7) for cam holder only 25 - HDK13 "Dowel pin hole h13 (H7) for both holder and driver Option Code j^jOrderSOUK100 - 25 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to page 943. □ Bolts for assembly are not indicated. iSpaceforremoving SOUK 100 985 986 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo...

Aerial Cam Unit( FOR PIERCE AND FLANGE □ Tolerances are from dowel pin finished hole Catalog No. (W) (K) Dowel Pin Hole Diameter SOUK 100 - 30 ■■■Dowel pin prepared hole SOUK 100 - 30 - HK13 ■ Dowel pin hole h 13 (H7) for cam holder only SOUK 100 - 30 - HDK13 ■Dowel pin hole h13 (H7) for both holder and driver Option Code [^| OrderSOUK100 - 30 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to...

Aerial Cam Unit( FOR PIERCE AND FLANGE 35 '"Dowel pin prepared hole 35 - HK13 " Dowel pin hole h 13 (H7) for cam holder only 35 - HDK13 "Dowel pin hole h13 (H7) for both holder and driver Option Code j^jOrderSOUK100 - 35 - DK13 - K ^ For machining details or tapping hole and dowel hole (prepared hole and finished hole) for mounting of the retainer, refer to page 559. For detailed specification of the key, refer to page 943. 0 Bolts for assembly are not indicated. iSpaceforremoving SOUK 100 989 990 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo...