SLSD
12Pages

Description of SLSD Cam Units PIERCE COMPACT LONG TRAVEL TYPE The travel is about 1.5 times as long as the same model (SUCD)'s travel. Compact design with the mount width of SLSD Structure and Assembly / Disassembly ❹ 52 mm and shut height of 135 mm Automatic alignment mechanism of the V-shaped guide. Standard Working Force(one million strokes)14.7kN, Allowable Working Force 29.4kN(300,000strokes). Available angle is 0° to 50°at increments SLSD Specifications W1 (Overall w idth) W (Mount Fa ce width) H Working Force kN (tonf) Mount Surface Woring Travel Standard Allowable Angle S Working Force Working Force W H 00 Initial Load Final Load Spring Force N(kgf) (one million strokes) (300,000 strokes) Unit Size Disassembly method of SLSD52 1) Remove hexagon socket head bolt ( ) and washer ( ), and remove stopper plate ( 2) Pull and remove cam slider ( ) from cam holder ( ) to the rear. Assembly method of SLSD52 1) Assemble components in the reverse order of disassembly. Make sure that there is no foreign matter on the sliding area before assembly. The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly. When cam is disassembled and then reassembled,please do not forget to assemble all bolts pro

SLSD52- 00 - SC40 SLSD52- 00 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. Aerial Cam Unit( PIERCE COMPACT LONG TRAVEL TYPECatalog No. (W) — (fl)SLSD 52 - 00■ Table of Components No. Space for removing ■ Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) 617 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 618

Catalog No. SLSD (W) — (tf)52 - 05 Option SLSD52- 05 - SC40 SLSD52- 05 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. ISpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 620

Catalog No. SLSD (W) — (tf)52 - 10 Option SLSD52- 10 - SC40 SLSD52- 10 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. ISpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 622

Catalog No. SLSD (W) — (tf)52 - 15 Option SLSD52- 15 - SC40 SLSD52- 15 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. ISpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 624

■Cam Diagram Travel S Catalog No. SLSD (W) - W 52 - 20 Option SLSD52- 20 - SC40 SLSD52- 20 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. iSpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 626

Catalog No. SLSD (W) — (tf)52 - 25 Option SLSD52- 25 - SC40 SLSD52- 25 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. ISpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 628

Catalog No. SLSD (W) — (tf)52 - 30 Option SLSD52- 30 - SC40 SLSD52- 30 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. ISpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 630

Catalog No. SLSD (W) — (tf)52 - 35 Option SLSD52- 35 - SC40 SLSD52- 35 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. ISpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 632

Catalog No. SLSD (W) — (tf)52 - 40 Option SLSD52- 40 - SC40 SLSD52- 40 - SC20 - WC Refer to page 551 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. ISpace for removing I Spring Diagram (Stripping Force at punch retraction of 5mm) • Spring Used TJL25-115(1 piece) • Spring Constant 19.6N/mm(2.00kgf/mm) Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. 634