Overview

This document provides technical specifications and guidelines for metal sliding materials, specifically bronze-based sliding plates with solid lubricants. It includes material properties, mounting instructions, operational parameters, and ordering information.

Material Specifications

• Base Material: Bronze with Graphite (SP2)
• Solid Lubricant: GR-1
• Physical Properties:
• Specific Gravity: 7.9 g/cm³
• Hardness: 210 HB or more
• Elongation: 12% or more
• Tensile Strength: 755 N/mm² or more
• Linear Expansion Coefficient: 1.9 × 10⁻⁵ /°C

Mounting Instructions

• Use flat head bolts for mounting.
• When drilling tapped holes on mating parts, chamfer the corners as illustrated.
• Recommended bolt sizes include M6 and M8 with specified dimensions for diameter, length, and head height.

Operational Parameters

Note: For operation above 150°C, the solid lubricant embedding specification changes; contact supplier for details.

Product Dimensions and Ordering

• Available thickness: 5 mm
• Catalog numbers correspond to various width (W) and length (L) dimensions, e.g., UWP 38 × 50 mm.
• Mounting bolt catalog numbers and dimensions are provided for compatibility.
• Custom or special parts can be requested.

Additional Notes

• The sliding direction and operation range should be considered during installation.
• Environmental conditions and lubrication significantly affect allowable load and sliding speed.
• Oilless slide plates are available in bronze type with specified thickness.