Overview
This document outlines the specifications and features of a cam slider system designed for improved processing efficiency and flexibility in layout. Key benefits include shorter process times, avoidance of interference with panels, sufficient width for scrap management, and enhanced disassembly for the cam slider.

Specifications
The cam slider system, identified by Catalog No. SACLB80, operates with a working force of 58.8 kN (6.0 tonf) and supports angles ranging from 50° to 80° in 5-degree increments. The cam width is specified at 80 mm.

Features
- The cam drive is positioned outside the cam slider, facilitating easier access and operation away from panel edges.
- External trimming allows for adequate space for scrap to fall, enhancing layout flexibility.
- The long body cam design aids in accessing hard-to-reach areas and prevents interference with panels.

Basic Specifications
The document provides detailed measurements for various angles:

• 50°: SS 40, WT 62.2, A 43, B 156.8
• 55°: SS 69.7, WT 38, A 160.8
• 60°: SS 80, WT 33, A 163.8
• 65°: SS 34, WT 80.5, A 21, B 167.8
• 70°: SS 28, WT 81.9, A 10, B 168.8
• 75°: SS 21, WT 81.1, A 5, B 170.8
• 80°: SS 14, WT 80.6, A 0, B 169.9

Durability
The coil spring within the unit is durable up to 300,000 cycles.

Contact Information
For inquiries, contact the sales team. Note that specifications and appearance are subject to change for quality improvements without prior notice.