Aerial Cam Unit General Description of SACD( WORKING FORCE 3-TON TYPE ~) •The standard working force (one million strokes) achieved 29.4 kN with the mounting width of 52 mm. The allowable working force (300,000 strokes) is 58.8 kN. •A spring force just under 10% of the working force is attained, which is optimum for high tensile strength steel sheets and thick plate piercing. •V-shaped guide. •Available angle is 0°to 60°at increments of 5° •Disassembly method of SACD52 1) Remove hexagon socket head bolt ((D), and remove stopper plate (©). 2) Pull and remove cam slider (©) from cam holder (O) to the rear. •Assembly method of SACD52 1)Assemble components in the reverse order of disassembly. • Make sure that there is no foreign matter on the sliding area and assemble components. • The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly. • When cam is disassembled and then reassembled,please do not forget to assemble all bolts provided. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserve

Aerial Cam Unit ( WORKING FORCE 3-TON TYPE Addition CAD FILE f A SACD 52 - 00 Catalog No. | | (W) | — (K) SACD 52 - 00 Option Code 0 Determine the pierce center position in the range of the cam width. ■Space for removing SACD52-00 - SC40- N12 SACD52 - 00 - WC120 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For Final Load TJH32-51(1 piece) 222.2N/mm(22.66kgf/mm) • Guideline of spring...

Aerial Cam Unit ( WORKING FORCE 3-TON TYPE Addition CAD FILE f ASACD 52 - 05 Travel S Option Code 0 Determine the pierce center position in the range of the cam width. ■Space for removing SACD52 - 05 - SC40 - N12 SACD52 - 05 - WC120 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For Final Load TJH32-51(1 piece) 222.2N/mm(22.66kgf/mm) • Guideline of spring durability TF20-80 300,000...

Aerial Cam Unit ( WORKING FORCE 3-TON TYPE Addition CAD FILE f ASACD52 -10 Travel S Catalog No. | | (W) | — (K) SACD 52 - 10 Option Code 0 Determine the pierce center position in the range of the cam width. Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For Final Load TJH32-51(1 piece) 222.2N/mm(22.66kgf/mm) • Guideline of spring durability TF20-80 300,000 strokes Copyright ©...

Aerial Cam Unit ( WORKING FORCE 3-TON TYPE Addition CAD FILE f ASACD52 - 15 Travel S Catalog No. | | (W) | — (K) SACD 52 - 15 Option Code 0 Determine the pierce center position in the range of the cam width. ■Space for removing SACD52 - 15 - SC40 - N12 SACD52 - 15 - WC120 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For Final Load TJH32-51(1 piece) 222.2N/mm(22.66kgf/mm) • Guideline...

Aerial Cam Unit( WORKING FORCE 3-TON TYPE Addition CAD FILE Option Code □ When the slider interferes with the die due to the protrusion length, you will need to machine the die for clearance. 0 Determine the pierce center position in the range of the cam width. ■Space for removing SACD52 - 20 - SC40 - N12 SACD52 - 20 - WC120 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For Final Load TJH32-51(1...

Aerial Cam Unit( WORKING FORCE 3-TON TYPE Addition CAD FILE Option Code 0 When the slider interferes with the die due to the protrusion length, you will need to machine the die for clearance. 0 Determine the pierce center position in the range of the cam width. ■Space for removing SACD52 - 25 - SC40 - N12 SACD52 - 25 - WC120 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For Final Load TJH32-51(1...

Aerial Cam Unit ( WORKING FORCE 3-TON TYPE Addition CAD FILE f ASACD 52 - 30 Travel S Option Code 0 When the slider interferes with the die due to the protrusion length, you will need to machine the die for clearance. 0 Determine the pierce center position in the range of the cam width. ■Space for removing SACD52 - 30 - SC40 - N12 SACD52 - 30 - WC120 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For...

Aerial Cam Unit( WORKING FORCE 3-TON TYPE Addition CAD FILE Option Code 0 When the slider interferes with the die due to the protrusion length, you will need to machine the die for clearance. 0 Determine the pierce center position in the range of the cam width. ■Space for removing SACD52 - 35 - SC40 - N12 SACD52 - 35 - WC120 Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole,finished hole) for retainer. 0 Bolts for assembly are not indicated. ■ Spring Diagram • Spring Used For Initial Load TF20-80(1 piece) 7.89N/mm(0.80kgf/mm) For Final Load TJH32-51(1...