Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Sankyo Oilless Industry
  3. HUCTF

HUCTF

HUCTF
1 / 17 PagesView full catalog

HUCTF

Product catalog summary
Overview of HUCTF: The document provides a comprehensive overview of the HUCTF (Improved Return Force Type) Aerial Cam Unit, specifically designed for thick metal piercing. It includes detailed specifications, assembly, and disassembly procedures.
Specifications: The HUCTF is optimized for piercing thick sheets or high-strength steel, with a standard working force of 68.7 kN for one million strokes and an allowable working force of 137.3 kN for 300,000 strokes. It features a high-power return force exceeding 6000 N, a V-shaped guide, and a working angle range from 0˚ to 75˚ in 5˚ increments. An ISO spring is used for enhanced durability.
Assembly and Disassembly Procedures: Step-by-step instructions are provided for assembling and disassembling the HUCTF. Key points include ensuring cleanliness of sliding areas, matching stamped serial numbers on components, and correct assembly of all bolts.
Component Details: A table lists components such as the cam slider, cam driver, cam holder, and various followers and plates, along with their materials and quantities. Detailed specifications for tapped and dowel pin holes are referenced.
Spring Specifications: The document details two springs: the TJB40-152 with a constant of 171.1 N/mm, designed for 300,000 strokes, and the TJB40-89 with a constant of 292.1 N/mm, designed for 500,000 strokes. Specifications include free length, length at final load, and load values.
Diagrams and Tables: Diagrams illustrate the cam unit and spring, while tables provide details on working force, spring force, and travel specifications for various HUCTF configurations.
Materials and Components: Materials used include FCD500 with graphite, S45C (1045) with graphite, bronze with graphite, SS400 (1020), and urethane. Components listed include cam slider, cam driver, cam holder, slide keeper, positive return followers, stopper plate, cam slide guide, lower plate, spring guide pin, stopper, and coil spring.
Additional Information: Detailed specifications for tapped holes and dowel pin holes are available on page 559. The document is copyrighted by Sankyo Oilless Industry, Inc.
See more

Catalog excerpts

HUCTF-1

Improved Return Force Type (for Thick Metal Pierce) Aerial Cam Unit General Description of HUCTF ( OUTLINE OF HUCTF 1 • Standard working force (one million strokes):68.7 kN,Allowable working force(300,000 strokes):137.3 kN. • High -power type with return force just over 6000 N. • V-shaped guide. • Available angle is 0° to 75° at increments of 5°. • Optimum for thick sheet or piercing of high strength steel. • ISO spring is used. •Disassembly method of HUCTF 1) Loosen hexagon socket head bolt (®) and remove stopper plate (O). Pull and remove cam slider (O) from cam holder (©) to the rear. •Assembly method of HUCTF 1) Assemble components in the reverse order of disassembly. •Make sure that there is no foreign matter on the sliding area and assemble components. •The clearance between the cam slider and the cam holder is controlled. Match the stamped serial number on the holder and slider before assembly. •When cam is disassembled and then reassembled, please do not forget to assemble all bolts provided. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Res

 Open the catalog to page 1
HUCTF-2

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE 1 Catalog No. (W) (K)HUCTF 65 — 00 ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Spring Diagram • Spring used TJB40-152 • Spring constant 171.1N/mm(17.45kgf/mm) • Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 m Bolts for assembly are not indicated. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless...

 Open the catalog to page 2
HUCTF-3

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE 1 ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Spring Diagram • Spring used TJB40-152 • Spring constant 171.1N/mm(17.45kgf/mm) • Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm m Bolts for assembly are not indicated. HUCTF 65 849 850 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

 Open the catalog to page 3
HUCTF-4

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE 1 ■Cam Diagram ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Spring Diagram • Spring used TJB40-152 • Spring constant 171.1N/mm(17.45kgf/mm) • Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm m Bolts for assembly are not indicated. 851 852 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All...

 Open the catalog to page 4
HUCTF-5

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE 1 ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Spring Diagram • Spring used TJB40-152 • Spring constant 171.1N/mm(17.45kgf/mm) • Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm m Bolts for assembly are not indicated. HUCTF 65 853 854 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

 Open the catalog to page 5
HUCTF-6

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Spring Diagram • Spring used TJB40-152 • Spring constant 171.1N/mm(17.45kgf/mm) • Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm m Bolts for assembly are not indicated. HUCTF 65 855 856 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved....

 Open the catalog to page 6
HUCTF-7

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE 1 ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Spring Diagram • Spring used TJB40-152 • Spring constant 171.1N/mm(17.45kgf/mm) • Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm m Bolts for assembly are not indicated. HUCTF 65 857 858 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

 Open the catalog to page 7
HUCTF-8

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE 1 ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Spring Diagram • Spring used TJB40-152 • Spring constant 171.1N/mm(17.45kgf/mm) • Guideline of spring durability 300,000 strokes z : Spring Force at punch retraction of 5 mm e : Spring return amount when the punch returns 5 mm m Bolts for assembly are not indicated. HUCTF 65 859 860 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights...

 Open the catalog to page 8
HUCTF-9

Aerial Cam Unit Improved Return Force Type( FOR THICK METAL PIERCE 1 ■Cam Diagram ^ Refer to page 559 for detailed specifications of tapped holes and dowel pin holes (prepared hole, finish hole) for retainer. ■Table of Components HSpring Diagram m Bolts for assembly are not indicated. HUCTF 65 861 862 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

 Open the catalog to page 9

All Sankyo Oilless Industry catalogs and technical brochures

  1. UCNBK100
    UCNBK100

    16  Pages

  2. UCNBK200
    UCNBK200

    16  Pages

  3. UCNBK65
    UCNBK65

    16  Pages

  4. SOUK200
    SOUK200

    16  Pages

  5. SOUK100
    SOUK100

    16  Pages

  6. SOUK65
    SOUK65

    16  Pages

  7. UCMSC F150
    UCMSC F150

    17  Pages

  8. UCMSC150
    UCMSC150

    17  Pages

  9. UCMSC
    UCMSC

    17  Pages

  10. UCMSC80
    UCMSC80

    17  Pages

  11. UCMSC65
    UCMSC65

    16  Pages

  12. UCMSC50
    UCMSC50

    16  Pages

  13. SULNC
    SULNC

    8  Pages

  14. SACE
    SACE

    14  Pages

  15. SUCD
    SUCD

    18  Pages

  16. SACLB80
    SACLB80

    2  Pages

  17. blanking die system
    blanking die system

    4  Pages

  18. General Description of Cam Unit
    General Description of Cam Unit

    20  Pages

  19. SESF
    SESF

    1  Page

  20. SACD
    SACD

    14  Pages

  21. SLSD
    SLSD

    12  Pages

  22. SESW / SESWT
    SESW / SESWT

    1  Page

  23. TSP
    TSP

    1  Page

  24. Stroke End Block
    Stroke End Block

    1  Page

  25. Spring Plunger
    Spring Plunger

    1  Page

  26. Feed Sensor
    Feed Sensor

    1  Page

  27. Locating Cone
    Locating Cone

    1  Page

  28. Shoulder Bolt and Locating Key
    Shoulder Bolt and Locating Key

    1  Page

  29. Slide Plate Steel, Thickness 20mm:FRP
    Slide Plate Steel, Thickness 20mm:FRP

    1  Page

  30. Slide Plate Copper Powder Sintered, Thickness20mm:SOX,SOXT
    Slide Plate Copper Powder Sintered, Thickness20mm:SOX,SOXT

    1  Page

  31. Slide Plate Copper Powder Sintered, Thickness10mm:TWX,TWXT
    Slide Plate Copper Powder Sintered, Thickness10mm:TWX,TWXT

    1  Page

  32. Blank Material for Bushing:S30 S60
    Blank Material for Bushing:S30 S60

    1  Page

  33. Bush Coper Powder Sintered, High Temperature type:HGB,HGBF
    Bush Coper Powder Sintered, High Temperature type:HGB,HGBF

    1  Page

  34. Bush Straight, Thin type:SOBU
    Bush Straight, Thin type:SOBU

    2  Pages

  35. Bush Straight type for Undr Water:SOBM
    Bush Straight type for Undr Water:SOBM

    1  Page

  36. Bush Flange type:SOBF
    Bush Flange type:SOBF

    2  Pages

  37. Die Materials :SO390/SO350/SO330 SO350/SO330
    Die Materials :SO390/SO350/SO330 SO350/SO330

    2  Pages

  38. Rubber Spring:SRX,SRXT
    Rubber Spring:SRX,SRXT

    6  Pages

  39. High Load Urethane Spring Counterbore Hole Type:USZL,USZLK
    High Load Urethane Spring Counterbore Hole Type:USZL,USZLK

    4  Pages

  40. Insulated Bushings / Washers:IB,IW
    Insulated Bushings / Washers:IB,IW

    1  Page

  41. Thrust Bush Split bushing:SOBBD
    Thrust Bush Split bushing:SOBBD

    1  Page

  42. Slide Guide Bronze L-Shaped Blank type:SGLX
    Slide Guide Bronze L-Shaped Blank type:SGLX

    1  Page

  43. Slide Guide Bronze L-Shaped type:SOL
    Slide Guide Bronze L-Shaped type:SOL

    1  Page

  44. Slide Plate Steel, Thickness 10mm:TGLWN
    Slide Plate Steel, Thickness 10mm:TGLWN

    1  Page

  45. Slide Plate Bronze, Thickness 5mm:UWP
    Slide Plate Bronze, Thickness 5mm:UWP

    1  Page

  46. Slide Guide Bronze L-Shaped type:SGLDW
    Slide Guide Bronze L-Shaped type:SGLDW

    1  Page

  47. Spherical Bush Set:SBSF,SBSS,SBSR
    Spherical Bush Set:SBSF,SBSS,SBSR

    1  Page

  48. Spherical Bush Unit Rhomboid Flange, Stainless type:DUFBS,DUSBS
    Spherical Bush Unit Rhomboid Flange, Stainless type:DUFBS,DUSBS

    1  Page

  49. HLSGC
    HLSGC

    1  Page

  50. CBSL, CBSPL
    CBSL, CBSPL

    1  Page

  51. Guide pin
    Guide pin

    1  Page

  52. SOB
    SOB

    4  Pages

  53. SBLT
    SBLT

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.