*mydirectindustry

Feed Sensor

Product catalog summary

Die Setting Components Overview
This document provides technical specifications and component details for die setting components, specifically focusing on the eSpring load type.

Specifications

Catalog Number: FDSN 203020fAf50
Load Types: Light (F), Middle (L), Heavy (M)
Dimensions: Various dimensions are provided for different components, including increments of 5mm.

Procedures

Application of screw adhesive is recommended for assembly.
Feed Sensor Unit operation: The unit is activated when electricity is supplied and the workpiece contacts the sensor. It deactivates when the workpiece is cut.

Component Table

Insulation Block: 1 piece, made of phenol resin.
Stud Bolt: 1 piece, SS400, M8.
Spring: 1 piece, SWP-A, with load type selection.
Stopper Plate: 1 piece, SS400.
Base: 1 piece, SS400.
Hexagon Nut: 2 pieces, S45C, M8.
Crimp Terminal with Insulation Cover: 1 piece, TMEV1.25-8 (Nichifu).

Load Type Selection

Light Load (F): 0.05 kgf/mm, max 0.9 kgf.
Middle Load (L): 0.1 kgf/mm, max 1.6 kgf.
Heavy Load (M): 0.3 kgf/mm, max 4.2 kgf.

Notes

Ensure correct load type selection based on application requirements.
Follow recommended procedures for optimal performance.

Catalog excerpts

Feed Sensor FEED SENSOR UNIT FDSN eSpring (Load Type) F(Light Load) L(Middle load) M(Heavy Load) Application of screw adhesive qSpring(e) selection list Load Type electricity is supplied to the workpiece and the workpiece comes in contact with the sensor, the unit is ON. 1 SWP-A (Refer to the selection list.) u Crimp Terminal with Insulation Cover 1 TMEV1.25-8 (Nichifu) 41 Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

Open the catalog to page 1

Feed Sensor

Feed Sensor

Catalog excerpts

All Sankyo Oilless Industry catalogs and technical brochures