labor saving and cost reduction makes the rectangle, parallelogram and trapezoid shape blank dies by reducing the blanking die! unnecessary. Double variable blanking die system praduced with one press stroke. Automatic type with servo motor drive control The die is moved or turned with the servo motor drive mechanism. Supply records The blanking die system has been supplied to many automobile manufacturers for outer and inner panels of automobiles. About 30 units have been supplied to customers in Japan and about 20 units have been supplied to overseas customers. It gained high acclaim. (As of...

General description of turn blanking die Die area ■ It consists of the upper die and the lower die. The upper die floats on gas springs. ■The upper die surface has a silencing urethane pad. ■The cutter surface of the upper die has shear angle. ■The cutters can be changed at four corners by turning. ■Desired turning angles can be determined. Transfer area (unloading side) ■A transfer conveyor driven with a general motor can be installed. ■ Feeding speed can be set with an inverter control unit. ■The transfer conveyor is a belt conveyor type. Common bed ■ Description of blanking press line When...

■The die is moved and turned with a landle. The reduction ratio of the gearbox unit facilitates movement and turning. (Common for manual type/automatic type) Die area (sheet unloading side) ■The die area at the sheet loading side has fixed cutters. It only turns on the bed. The die specification is the same as \ that of the turn blanking type. / Die area (sheet loading side) ■The die area at the sheet loading side has movable cutters. It moves and turns on the bed. Intermediate transfer conveyor •The transfer conveyor is installed at the center of two die areas. A kicker at the center of the...