Slide Plate Technical Specifications

Dimensions and Sizes

The slide plates are available in widths (W) of 28, 38, 48, 75, 100, 125, and 150 mm. Lengths (L) vary from 75 mm up to 300 mm depending on the width. Thickness is standardized at 10 mm.

Key dimensional parameters include:

• Diameter holes: φ17.5 mm and φ11 mm with a tolerance of ±0.01 mm.
• Radius and chamfer details: R2, R5, R10, and C1.5 chamfers all around, with chamfered shapes specified for relief on corners.
• Length tolerances: L with -0.1 to -0.3 mm, La ±0.2 mm, and Lb with specific values depending on the model.
• Width tolerances: W with -0.1 to -0.3 mm, Wa ±0.2 mm, and Wb dimensions vary by model.

Material and Construction

The slide plates are made from a base plate of S45C (equivalent to C45 or A1045 steel) with a sintered copper powder layer (#220 grit) applied in a hatched area. The sintered layer thickness is at least 1.2 mm, providing enhanced sliding properties.

Mounting and Accessories

Mounting bolts are included, specifically special brazier head bolts conforming to LCS standards (e.g., LCS-10-20). Bolt specifications include M10×1.5 thread size with length and tolerance details.

Options and Customization

Special orders for custom parts are accepted. An example option is the "CM" code, which specifies chamfering on all four corners for relief. Chamfer sizes can be instructed during ordering, with typical chamfer dimensions ranging from 6 mm up to a maximum of 17 mm depending on width.

Catalog and Ordering Information

Each slide plate model is identified by a catalog number starting with "TWX" followed by width and length codes (e.g., TWX 38 L 150). The catalog includes detailed size tables for W, L, La, Lb, Wa, and Wb dimensions, along with corresponding product codes (e.g., 1H01 to 1H40).

Critical Parameters and Tolerances

• Thickness: 10 mm fixed.
• Hole diameters: φ17.5 mm and φ11 mm with ±0.01 mm tolerance.
• Length and width tolerances: Length L (-0.1 to -0.3 mm), La ±0.2 mm, Width W (-0.1 to -0.3 mm), Wa ±0.2 mm.
• Chamfering: Optional with specified sizes for corner relief.

Summary

This document provides detailed mechanical specifications for sintered copper powder slide plates with steel base plates, including dimensional tolerances, material composition, mounting accessories, and options for customization such as chamfering. The catalog numbers and size tables facilitate precise ordering and application in sliding mechanisms.