- Catalogs
- SANKYO OILLESS INDUSTRY,INC.
- Slide Guide Bronze L-Shaped type
Slide Guide Bronze L-Shaped type
1 / 1 PageView full catalog
Slide Guide Bronze L-Shaped type
Product catalog summary
Specifications:
The document outlines the specifications for metal sliding materials, specifically focusing on bronze with graphite (SP2) as the base material. The dimensions and tolerances for various components are provided, including diameter, width, and length measurements. The sliding direction is specified, and the material includes a hatched area for solid lubricant (GR-1).
The document outlines the specifications for metal sliding materials, specifically focusing on bronze with graphite (SP2) as the base material. The dimensions and tolerances for various components are provided, including diameter, width, and length measurements. The sliding direction is specified, and the material includes a hatched area for solid lubricant (GR-1).
Operation Range:
The operation range is defined by the lubricant type and environmental conditions. For GR-1, no lubrication is required in atmospheric conditions, with a maximum allowable load of 100 N/mm², sliding speed of 15 m/min, and PV value of 150 N/mm²•m/min. The temperature range is from -50°C to +300°C. With regular lubrication (grease), the load increases to 30 N/mm², speed to 200 m/min, and temperature range narrows to -50°C to +150°C.
The operation range is defined by the lubricant type and environmental conditions. For GR-1, no lubrication is required in atmospheric conditions, with a maximum allowable load of 100 N/mm², sliding speed of 15 m/min, and PV value of 150 N/mm²•m/min. The temperature range is from -50°C to +300°C. With regular lubrication (grease), the load increases to 30 N/mm², speed to 200 m/min, and temperature range narrows to -50°C to +150°C.
Physical Properties:
The material has a specific gravity of 7.9 g/cm³, hardness of 210 HB or more, elongation of 12% or more, tensile strength of 755 N/mm² or more, and a linear expansion coefficient of 1.9 ×10−5/°C.
The material has a specific gravity of 7.9 g/cm³, hardness of 210 HB or more, elongation of 12% or more, tensile strength of 755 N/mm² or more, and a linear expansion coefficient of 1.9 ×10−5/°C.
Order and Mounting Information:
Catalog numbers are provided for ordering, with specifications for bolt positions and mounting bolts. The document lists various sizes and quantities for bolts, indicating the flexibility in ordering different dimensions.
Catalog numbers are provided for ordering, with specifications for bolt positions and mounting bolts. The document lists various sizes and quantities for bolts, indicating the flexibility in ordering different dimensions.
Special Requests:
The document notes that special parts can be requested or ordered. It also mentions that for high-temperature applications (150°C or more), the embedding specification of solid lubricant differs, and further details can be obtained by contacting the supplier.
The document notes that special parts can be requested or ordered. It also mentions that for high-temperature applications (150°C or more), the embedding specification of solid lubricant differs, and further details can be obtained by contacting the supplier.
See more
Catalog excerpts
SLIDE GUIDE Oilless Slide Guide Bronze L-Shaped Type | SO#50SP2 •Sliding Direction ■We are ready to accept requests or orders for special parts. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
Open the catalog to page 1All SANKYO OILLESS INDUSTRY,INC. catalogs and technical brochures
PSCL,PSCM1 Page
SHPUC3 Pages
SACE14 Pages
TSHC2 Pages
SACLB802 Pages
SUCD18 Pages
SHCP1 Page
SNR41,42,43 Series1 Page
SFCU,SFCUB1 Page
CBSL,CBSPL1 Page
MCUW,MCUF,MCUS1 Page
TWP1 Page
Parallel Link Unit1 Page
Single Link Unit1 Page
Spherical Bush Set1 Page
Cam Slide Guide (L Type)1 Page
Cam Stroke Plate1 Page
Roller Cam Unit2 Pages
Roller Cam Unit2 Pages
Side Gauge1 Page
DA Gauge1 Page
Spring Plunger1 Page
Spring Plunger1 Page
Feed Sensor1 Page
Locating Cone1 Page
Shoulder Bolt1 Page
Slide Plate Blank Type1 Page
Guide Bushing2 Pages
Ejector Guide Bushing1 Page
Ejector Guide Pin2 Pages
Automatic Blanking Die4 Pages
Die Materials2 Pages
Aerial Cam Unit For Pierce18 Pages
Slide Plate VSM SP2,ST1 Page
Lifting Hook(Eye Bolt)1 Page
Shim Plate1 Page
Ball Guide Bushing1 Page
Archived catalogs
General Description of Cam Unit20 Pages
LARGE TYPE FOR PIERCE AND FLANGE15 Pages
Ball Plunger1 Page
Related Searches
- Measuring device
- Lifting system
- Metal chain
- Industrial measuring module
- Plain bearing
- Mechanical buffer
- Anti-vibration damper
- Metal plain bearing
- Plastic buffer
- Cutting tool
- Metal bushing
- Guide rail
- Self-lubricating plain bearing
- Plastic plain bearing
- Compact buffer
- Rubber absorber
- Steel rail
- Spring plunger
- Steel plain bearing
- Slide rail
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.