Slide Core Unit FOR SHAPE MACHINING Lower Plate Guide Rail(SGLWN) Coil Spring 1 Bronze with Graphite(SP2) 2 Bronze with Graphite(SP2) Hexagonal Socket Head Bolt 1 SCM435 M8 Stopper (STB) Support Plate Plate at Movable Side Consider the load carefully when a part Plate at Fixing Side Example of using SCSS / SCSH Material of the slide core can be changed. Please contact the Sales Dept. 2 30 Slide Core Unit Spring Used Core Insert Slide Core Unit Slide Core Related Parts Relief Hole dimension f Travel f H Core Pin Cavity S Consider the load carefully when a part is installed at the end of the slide core. Travel is installed at the end of the slide core. 40 Spring constant 1.43kgf/mm 60 10 75 Spring Used TF20-45 50 10 SCSS 13 85 Spring constant 1.43kgf/mm 600.02 28.6kgf (Final Load) 13 40 90 14.3kgf (Initial Load) Consider the load carefully when a part 50 20 145 600.02 is installed at the end of the slide core. 0 50 Free Length 45mm E 60 0.05 60 Spring Used70 TF20-45 20 145 10 Spring constant 1.43kgf/mm SCSH 20 0 28.6kgf(Final Load) 13 50 E 60 0.05 14.3kgf(Initial Load for travel 10) 90 15 70 10.8kgf(Initial Load for travel 13) 20 Free Length 45mm S 15 W H S Catalog No. S Order 60 50 SCSS 13 Stopper STB(Accessory) 90 70 SCSH 10 9.8 17 35 For details of the guide rail ( SGLWN25-100), 22 9.8 20 refer to page. 131. 17 For details of the locking block and the angular 10 6 22 Plate Angular Pin at Fixing Side Slide Core Locking Block Table of Components No. Description Tolerance 0.02 Guide Rail 0.04 9 Spring Used TF20-45 20 Spring constant 1.43kgf/mm SCSS SCSH is installed at the end of the slide core. Consider the e Catalog No. load carefully when a part t (Tolerances are dowel hole) (Tolerances are dowel hole) SCSS SCSH(Slide Core Long Type) Plate at Movable Side