Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. SANKYO OILLESS INDUSTRY,INC.
  3. Guide Post (Pulling Washer)

Guide Post (Pulling Washer)

Guide Post (Pulling Washer)
1 / 1 PageView full catalog

Guide Post (Pulling Washer)

Product catalog summary
Guide Components Overview
This document provides specifications and options for guide components, specifically focusing on pulling tap holes and washers for guide posts.

Specifications
  • Pulling Tap Hole: Drilled at the side of the press-fit area. The screw diameter M must be specified.
  • Pulling Washer for Guide Post (GPHW): Supplied with the guide post. Applicable diameters are 60, 80, and 100. A tap hole of M16 × 50 has been drilled, but bolts with hexagonal socket heads are not provided.

Options and Codes
  • SGP 40, SGP 80, Order 160, 250, MP10, HW

Dimensions and Tolerances
  • Guide Post Diameter (D): Options include 25, 30, 40, 50, 60, 65, 80, 100.
  • Screw Diameter (M): Options include M8, M10, M12, M16, M20.
  • Depth of Screw (M): Options include 25, 30, 40, 50.

Material and Hardness
  • Material: S45C
  • Hardness: HRC55 to 60

Additional Information
  • Special lengths are available upon request.
  • Material for pulling washer: SS400
See more

Catalog excerpts

Guide Post (Pulling Washer)-1

Guide Post PRESS-FIT TYPE Tapped Hole over itèO Diameter for lifting ISpecial lengths are available upon request. Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved. ■ Pulling washer for guide post Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.

 Open the catalog to page 1

All SANKYO OILLESS INDUSTRY,INC. catalogs and technical brochures

  1. PSCL,PSCM
    PSCL,PSCM

    1  Page

  2. SHPUC
    SHPUC

    3  Pages

  3. SACE
    SACE

    14  Pages

  4. TSHC
    TSHC

    2  Pages

  5. SACLB80
    SACLB80

    2  Pages

  6. SUCD
    SUCD

    18  Pages

  7. SHCP
    SHCP

    1  Page

  8. SNR41,42,43 Series
    SNR41,42,43 Series

    1  Page

  9. SFCU,SFCUB
    SFCU,SFCUB

    1  Page

  10. CBSL,CBSPL
    CBSL,CBSPL

    1  Page

  11. MCUW,MCUF,MCUS
    MCUW,MCUF,MCUS

    1  Page

  12. TWP
    TWP

    1  Page

  13. Flange Lifter Pneumatic Type
    Flange Lifter Pneumatic Type

    1  Page

  14. Corner Link Unit Prevent Double Hits
    Corner Link Unit Prevent Double Hits

    1  Page

  15. Parallel Link Unit
    Parallel Link Unit

    1  Page

  16. Single Link Unit
    Single Link Unit

    1  Page

  17. Coil Support Bronze Support Bar Type, Light Load/Heavy Load Type
    Coil Support Bronze Support Bar Type, Light Load/Heavy Load Type

    2  Pages

  18. Guide Roller Set Swing Type
    Guide Roller Set Swing Type

    1  Page

  19. Spherical Bush Set
    Spherical Bush Set

    1  Page

  20. Cam Slide Guide (L Type)
    Cam Slide Guide (L Type)

    1  Page

  21. Cam Stroke Plate
    Cam Stroke Plate

    1  Page

  22. Roller Cam Unit
    Roller Cam Unit

    2  Pages

  23. Roller Cam Unit
    Roller Cam Unit

    2  Pages

  24. Panel Input Detector Gauge
    Panel Input Detector Gauge

    1  Page

  25. Panel Input Detector Gauge
    Panel Input Detector Gauge

    1  Page

  26. Side Gauge
    Side Gauge

    1  Page

  27. DA Gauge
    DA Gauge

    1  Page

  28. Spring Plunger
    Spring Plunger

    1  Page

  29. Spring Plunger
    Spring Plunger

    1  Page

  30. Feed Sensor
    Feed Sensor

    1  Page

  31. Locating Cone
    Locating Cone

    1  Page

  32. Shoulder Bolt
    Shoulder Bolt

    1  Page

  33. High Load Urethane Spring Counterbore Hole Type
    High Load Urethane Spring Counterbore Hole Type

    4  Pages

  34. Rubber & Urethane Springs / Storage Blocks:High Load Urethane Spring X Type
    Rubber & Urethane Springs / Storage Blocks:High Load Urethane Spring X Type

    3  Pages

  35. Hemming Units: 2-stage Support Link
    Hemming Units: 2-stage Support Link

    1  Page

  36. Slide Core Related Parts:VG2
    Slide Core Related Parts:VG2

    1  Page

  37. Slide Core Related Parts:Guide ber
    Slide Core Related Parts:Guide ber

    1  Page

  38. Slide Core Related Parts:Guide rail
    Slide Core Related Parts:Guide rail

    1  Page

  39. Locking Block Augular Pin
    Locking Block Augular Pin

    1  Page

  40. Slide Core Unit for Shape Machining
    Slide Core Unit for Shape Machining

    1  Page

  41. Slide Plate High Pressure, Bronze Type
    Slide Plate High Pressure, Bronze Type

    1  Page

  42. Slide Plate Thickness 5mm-Bronze Type
    Slide Plate Thickness 5mm-Bronze Type

    1  Page

  43. Slide Plate Blank Type
    Slide Plate Blank Type

    1  Page

  44. Slide Plate Thickness 10mm-Sintered Type
    Slide Plate Thickness 10mm-Sintered Type

    1  Page

  45. Slide Plate Thickness Sintered Blank Type
    Slide Plate Thickness Sintered Blank Type

    1  Page

  46. Slide Plate:Slide Plate Thickness 20mm-Steel Type
    Slide Plate:Slide Plate Thickness 20mm-Steel Type

    1  Page

  47. Die Guide Related Parts:Guid Bushing and Clamp
    Die Guide Related Parts:Guid Bushing and Clamp

    1  Page

  48. Die Guide Related Parts:Guide Bushing for Large Die
    Die Guide Related Parts:Guide Bushing for Large Die

    1  Page

  49. Die Guide Related Parts:Assist Pin
    Die Guide Related Parts:Assist Pin

    2  Pages

  50. Die Setting Components:Lifting Hook
    Die Setting Components:Lifting Hook

    1  Page

  51. Oilless Resin Slideing Materials: Bush (Drystar) Lead Free, Straight type
    Oilless Resin Slideing Materials: Bush (Drystar) Lead Free, Straight type

    4  Pages

  52. Oilless Resin Slideing Materials: Washer (Drystar)
    Oilless Resin Slideing Materials: Washer (Drystar)

    1  Page

  53. Ejector Guide Bushing for High Temperature
    Ejector Guide Bushing for High Temperature

    1  Page

  54. Guide Bushing
    Guide Bushing

    2  Pages

  55. Ejector Guide Bushing Long Type
    Ejector Guide Bushing Long Type

    1  Page

  56. Ejector Guide Bushing
    Ejector Guide Bushing

    1  Page

  57. Ejector Guide Pin
    Ejector Guide Pin

    2  Pages

  58. Automatic Blanking Die
    Automatic Blanking Die

    4  Pages

  59. Coil Support Economy Type
    Coil Support Economy Type

    1  Page

  60. Side Gauge Air Drive Type
    Side Gauge Air Drive Type

    1  Page

  61. H-Type Lifter Flat Upper Surface Type HLSGF
    H-Type Lifter Flat Upper Surface Type HLSGF

    1  Page

  62. Panel Stabilizer Pin Plate Spring Type
    Panel Stabilizer Pin Plate Spring Type

    1  Page

  63. Die Materials
    Die Materials

    2  Pages

  64. Transfer Conveyor Unit Stopper,Lifter Unit
    Transfer Conveyor Unit Stopper,Lifter Unit

    4  Pages

  65. High Load Urethane Spring Counterbore Hole Type USZL,USZLK
    High Load Urethane Spring Counterbore Hole Type USZL,USZLK

    4  Pages

  66. Aerial Cam Unit For Pierce
    Aerial Cam Unit For Pierce

    18  Pages

  67. Slide Plate VSM SP2,ST
    Slide Plate VSM SP2,ST

    1  Page

  68. Lifting Hook(Eye Bolt)
    Lifting Hook(Eye Bolt)

    1  Page

  69. Guid Bushing and Clamp 9834/VDI-KL
    Guid Bushing and Clamp 9834/VDI-KL

    1  Page

  70. Adjusting Rod Set (For Direct Ejection Pin)
    Adjusting Rod Set (For Direct Ejection Pin)

    1  Page

  71. Slide Unit for Loose Core Compact Type RCSUF,RCSUM
    Slide Unit for Loose Core Compact Type RCSUF,RCSUM

    1  Page

  72. Slide Unit for Loose Core
    Slide Unit for Loose Core

    1  Page

  73. Slide Core Unit for Core Pin Mounting
    Slide Core Unit for Core Pin Mounting

    1  Page

  74. Shim Plate
    Shim Plate

    1  Page

  75. Slide Guide Bronze L-Shaped type
    Slide Guide Bronze L-Shaped type

    1  Page

  76. Bush (Drystar) Lead Free, Straight type
    Bush (Drystar) Lead Free, Straight type

    4  Pages

  77. Spherical Bush Unit Pillow, FC type
    Spherical Bush Unit Pillow, FC type

    1  Page

  78. Ball Guide Bushing
    Ball Guide Bushing

    1  Page

  79. Guide Post Set Plain Type
    Guide Post Set Plain Type

    1  Page

  80. Guide Bushing Universal Straight Type
    Guide Bushing Universal Straight Type

    4  Pages

  81. Lifting Hooks Lug / Regular Type
    Lifting Hooks Lug / Regular Type

    1  Page

Archived catalogs

  1. General Description of Cam Unit
    General Description of Cam Unit

    20  Pages

  2. Guide Post Set Components
    Guide Post Set Components

    1  Page

  3. centering wear slide rail
    centering wear slide rail

    1  Page

  4. LARGE TYPE FOR PIERCE AND FLANGE
    LARGE TYPE FOR PIERCE AND FLANGE

    15  Pages

  5. Ball Plunger
    Ball Plunger

    1  Page

  6. Ball ButtonYPress-Fit Button
    Ball ButtonYPress-Fit Button

    1  Page

  7. Outline of Spherical Bushing Unit
    Outline of Spherical Bushing Unit

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.