General Description of Cam Unit
20Pages

{{requestButtons}}

Catalog excerpts

General Description of Cam Unit - 1

■5 General Description off Cam Unit DVER VIEW ■Types and Featurc* of Aerial Cam Unit S U C D Compact Type For Pierce RB7B-614 SACD Compact Type For Pierce Working Force 3tonf R 639-666 Compact design with the mountlng width of 52 mm and the shut height of 125 mm. Automatic alignment mechanism of the V-shaped guide, AvailaWe angleis O'to60"at incrments of 5". Mount w»dth is 52mm. The spring lorce is about 3.0 times as long as the same model's travel. A lltde less than 10% of the piercing loroe is achteved. It is most suitable for piercing of high strength steel and ihick steel. Automatic aNgnment mechanism of the V-shaped guide. Availabto angle \S 0°to 60° at incrments Of 5*. Wortina Force kNitonfi Standard Worbrtg Forco oWonong Forco (on* mlbittroku) (300. oco sirops} 14.7 294 0*5) (30) iVorking Forco kNftontJ StsncMWoifckngFortJ AJbw«bfc Worfchj Force (ont RiiUofl ttio驠oi) (300.C00strokot) 20.4 (3.0) (6.0) 5L5D Long Travel Type For Pierce The travel is about 1-5 limes as long as thg same modela (SUCD) travel. Օ Compact design with the mountlng width of 52 mm and the shut height of 135 mm. Automatic allgnmenl mechanism of the V-shaped guide. Օ Ava.labJe angle is 0Dto 50° al ncrements of 5D. ISO springs are used. SULNC Long Nose Type For Pierce 5RW7~*682 Օ Mount width is 65 mm. In addition to a long nos© (protrusion by 70 mm longer for the standard type than normal product). further protrusion ol 150 mm (SC option) is available Օ Automatic alignment mechanism of the V-shaped guide Availabte angle is O'to 25° at incrթments of 5 Working Forco kM(tonf) Working Forco kN(tonf) Standard Wor fcrg Force (om mlbartrokoj) A'Iovrabto Worbng Forco (300.000 a»okw) u.7 (1 5) 29.4 (3-0) SUraiird Wcrt hg Fot« AJ cwifato *Wro Fort* (ooo milton otrokot) (300,000 «rokoo) u.7 294 (15) (30) 540

Open the catalog to page 1
General Description of Cam Unit - 2

j General Description off Cam Unit dver view huctf For thick mtal pierce reinforced return force type p.683-716 u c msc80 150 Standard Type for Pierce Strong type wllh spring force of a bout 6000 N-600kgt. It is mosl suitable for piercng ol high strengTh sleet and tfuck steel Automaticalignmentmechanismofthe V-shaped guide. Avadable angle Is 0° to 75* at Incr镩ments of 5fl. ISO springs are used. Standard type with the mount wndth which Is equal to the cam width. ՕAutomaticalignmentmechanismofthe V-shaped guide. Cam Slider is removable from the back skie. ՕAvailatte anje is 0* to 70' at...

Open the catalog to page 2
General Description of Cam Unit - 3

General Description of Cam Unit C OVER VIEW SOUK Standard Type for Pierce and Flange P.851944 SUWB Wide Type For Pierce and Flange P. 1007ח1098 Highly rigid sliding structure of cam slider. Օ Cam Slider is removable from the back side. Available angle is 0° to 70° at increments of 5°. Օ 65,100 and 200 are available for the mount width. 200, 300, 400, 500 and 600 are available for the mount width. Օ Automatic alignment mechanism of the V-shaped guide. Cam Slider is removable from the back side. Օ Available angle is 0° to 60° at increments of 10°. (Angle up to 20°is increments of 5°.)...

Open the catalog to page 3
General Description of Cam Unit - 4

General Description of Cam Unit C OVER VIEW ■Types and Features of Die Mounted Cam Unit UCMSL Large and Long Life Type For Pierce and Flange P. 12671352 CMSD Compact Type For Pierce P. 1555ח1574 500 to 1000 at the increments of 100 mm are available for the mount width. Օ Available angle is 0° to 60° at increments of 10°. 52 and 90 are available for the mount width. Օ Easy to remove the cam slider. Available angle is 0° to 20° at increments of 5°. (Up to 15°for CMSD90) Mount Width Working Force kN(tonf) 500-600 137.3(14.0) 700-800 470.4(48.0) 900-1000 627.2(64.0) Mount Width Working Force...

Open the catalog to page 4
General Description of Cam Unit - 5

; General Description off Cam Unit dver view ■Spcial DieMountedCam Unit kgsp long life type for pierce and flange RI 665-1738 wcmshavcms Double Carn Unit Sries SRI 773-1788 驕Slnce the cam is an aerial type, the overall design is made compact. Available angle isO.ODioi0.0sat incrթments ofO.S*. (The angle can be specrfwd at incrments of OJ'from 16*10 3.9*.) ifthe working angleIschanged. the cam shut hetght is constant. 镕Two types with/without the guide cam hoidor are available. Hlghlyrigldstructurawlththeoverseas automobrte manufacture* spcification. 52.80.150,200 and 300 are availablo tor...

Open the catalog to page 5
General Description of Cam Unit - 6

Diapositive 1 table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Arial", sans-serif; } .font1 { font:11.00pt "Arial", sans-serif; } .font2 { font:13.00pt "Arial", sans-serif; } .font3 { font:16.00pt "Arial", sans-serif; } .font4 { font:20.00pt "Arial", sans-serif; } .font5 { font:31.00pt "Arial", sans-serif; } .font6 { font:37.00pt "Arial", sans-serif; } .font7 { font:10.00pt "Arial Black", sans-serif; } .font8 { font:21.00pt "Arial Black", sans-serif; } .font9 { font:31.00pt "Arial Black", sans-serif; } .font10 { font:48.00pt "Courier New", monospace; }...

Open the catalog to page 6
General Description of Cam Unit - 7

ufi= General Description of Cam UnitOption AERIALCAM UNIT OPTION ■Tapped Hole and Dowel Pin Hole (Prepared Hole, Finish) Machining for Retainer Mounbng ǕInstruction method tor machining Indicate ne tapped hole aameter and rte dowel pci note (or prepared hole) rjameter wth the XY coordinates. ՕTo ind>cate the coorolnates The oigfo is pdltiotcd at the upper ը f carier ofbSe nrarnt sur 6ce. * tndcalion symbcJ M...Tapped hole.rv--Dowel pin prepared holo.nL,Dowel pin finish hole Machining standard ՕTapped notes and dowel pin prepared noies are machined to gnerai tolrances. ꩕Depti ot both tappod...

Open the catalog to page 7
General Description of Cam Unit - 8

; General Description off Cam Unit (OVERVIEW ■Calcultion Formula of Force Applied to erial Cam Unit ILocatingandInstallation Proc
dure of Pierce Punch (retainer) in AerialCamunit ® Drill the mounting notes and dowel pin ho les (finish) on the de for the cam holder and the cttver. ® Flx the cam holder and the driver on the die wth botte and dowel pins. ®Set tho cam slder removed from tfio cam holder on tho taed drtvar and tocate the pierce punch (retainer). (J)Fix tho pierce punch (retainer) on the cam holder (D Mount the cam slider on the cam holder fixod on the die. Locating and...

Open the catalog to page 8

All SANKYO OILLESS INDUSTRY catalogs and technical brochures

  1. PSCL,PSCM

    1 Pages

  2. SHPUC

    3 Pages

  3. SACE

    14 Pages

  4. TSHC

    2 Pages

  5. SACLB80

    2 Pages

  6. SUCD

    18 Pages

  7. SHCP

    1 Pages

  8. SFCU,SFCUB

    1 Pages

  9. CBSL,CBSPL

    1 Pages

  10. TWP

    1 Pages

  11. Side Gauge

    1 Pages

  12. DA Gauge

    1 Pages

  13. Feed Sensor

    1 Pages

  14. Shim Plate

    1 Pages

Archived catalogs

  1. Ball Plunger

    1 Pages