Sandvik surface drilling
16Pages

SURFACE DRILLING EXTRACT FROM OFFERING GUIDE JANUARY 2015 SANDVIK MINING

BLASTHOLE DRILLS, ROTARY CONFIGURATION 32 BLASTHOLE DRILLS, DTH CONFIGURATION 34 HIGH PRESSURE DTH DRILLS 36 HIGH MOBILITY DTH DRILLS 38 COMPRESSOR MANAGEMENT SYSTEM 42 NOTE! | NOTE! I NOTE! I NOTE! Rock Drilling Customer Foam Fire Selection Tools Services Suppression Guides Surface Drilling | Sandvik Offering Guide 2015 29

SAFETY FIRST SAFETY From cab design to automation, safety is at Reducing environmental impact is a key issue the forefront of every Sandvik surface drilling mines face today. The patented Sandvik Com- design. The new generation of Sandvik rotary pressor Management System (CMS), which drills incorporate EMESRT design philoso- can be implemented on new rotary blasthole drills or retrofitted, reduces fuel consumption mark. While the rugged Sandvik drill exterior 20–35 %. The system works by isolating the is built to stand up to the toughest environ- compressor and eliminating the need to main-...

BLASTHOLE DRILLS – ROTARY The rugged design of Sandvik blasthole drills Environmental and Financial benefits: makes them ideal for rotary drilling in a full hole -- Reduce fuel consumption 20–35 % range from 127 to 349 mm (5 to 13 3/4"). Models -- xtend the life of the engine and E are built on solid frames with rigid lattice-style masts. From high-strength pulldown chains to durable power group, components and compressor -- ower service costs from extended L service intervals designs are chosen for reliable, continuous -- Reduce drill bit and drill pipe wear operation in some of the...

NOTE! Rock Tools p. 110 NOTE! Selection Guides p. 306 HOLE DEPTH, FIRST PASS MAXIMUM HOLE SIZE HOLE DEPTH UNDER­ CARRIAGE MAXIMUM MAXIMUM PULLDOWN BIT LOAD OPERATING STANDARD STANDARD WEIGHT ENGINE LOW-PRESSURE COMPRESSOR Options available for higher capacity or operation at high altitude. All rigs described with upgraded engines and compressors. Engine and compressor ratings calculated at standard atmospheric conditions. All weights are approximate and may change depending on the configuration. Surface Drilling | Sandvik Offering Guide 2015

BLASTHOLE DRILLS – DTH Tailored options turn Sandvik blasthole drills fine feed control and low-speed rotary head into highly productive Down-The-Hole (DTH) allow the operator to maximize the life and drills that are particularly suited for high-ton- productivity of the drilling tools. Dust suppres- nage, hard-rock mining applications. All drills sion is effective with water injection or dry dust are diesel powered and fully self-contained. Strong frames and heavy-duty masts support the longevity and reliability demanded for large-scale bench drilling. Depending on the model and specified...

HOLE DEPTH FIRST PASS MAXIMUM HOLE HOLE SIZE HAMMER UNDER­ Options available for higher capacity or operation at high altitude. All rigs described with upgraded engines and compressors. Engine and compressor ratings calculated at standard atmospheric conditions. All weights are approximate and may change depending on configuration. Surface Drilling | Sandvik Offering Guide 2015

HIGH PRESSURE DTH DRILLS The DR500 series high pressure DTH drills extreme climates, rod handling and dust sup- feature the unique combination of high pres- pression in harsh environments and altitudes. high flexibility (multiple application areas). away from potential hazards, enhancing safe- The drills operate with an industry-leading ty. The DR500 series has been tested around the world and proven as a leader in boom pro- duction drilling, pre-split drilling and reverse circulation drilling. 350 psi) @ 2,100 rpm. This powerful match of pressure and volume enhances penetration rates and...

NOTE! Rock Tools p. 110 Drill pipe length Drill pipe diameter,standard - 6 rods carousel loader or - 5 rods carousel loader Drill pipe diameter,optional - 8 rods carousel loader Depth capacity without reloading. Standard - 6 rods Standard - 5 rods Depth capacity without reloading. Optional - 8 rods Engine power Hole diameter TRANSPORT INFORMATION (EXCLUDING OPTIONS) DR560 MAXIMUM OPERATING PRESSURE DR560 Worn hammers will/may cause a drop in pressure or require larger air capacity. Surface Drilling | Sandvik Offering Guide 2015

HIGH MOBILITY DTH DRILLS With the highest mobility, smaller footprint and features ensure cost-effective machine op- ability to serve multiple sites, the DI550 drill eration. A straightforward design with access completes our surface mining DTH offering. to daily maintenance points from ground Besides regular production blasthole drilling, level supports greater uptime. The DI550 is these machines are used for pre-split, perim- designed for drilling with 4", 5" and 6" DTH eter and buffer holes. The machines are used by mining companies and by contractors who move between mine sites. The...

DI550 Drill hole diameter Drill pipe length Drill pipe diameter Magazine capacity Drilling dept (magazine capacity) Fixed boom (standard) Telescopic boom (optional) Surface Drilling | Sandvik Offering Guide 2015

TOP HAMMER DRILLS Renowned for high penetration rates, DPi drills are designed to use 51 to 60 mm drill reliability, fuel economy and low operating steel, which provide high bending resistance, cost, Sandvik top hammer drills are diesel enabling the use of maximum kinetic power for powered, self-contained and equipped with drilling straight holes fast without compromis- air compressors, dust collection systems ing rock tool service life. and operator’s cabins. They are designed for drilling 22 to 152 mm (¾ to 6") blastholes up to The highest performance of the DX range of medium-heavy top...

Recommended hole diameter Drill steel diameter Hydraulic rock drill Percussion output power Engine type Engine output power 168 kW/2,200 rpm 224 kW/1,800 rpm 261 kW/2,100 rpm Operators cabin ErcoCool Ergo Cool Ergo Coo Certificate ROPS&FOPS POPS & FOPS POPS & FOPS Rock Tools Foam Fire Surface Drilling I Sandvik Offering Guide 2015