sandvik lh202
6Pages

TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining with the best payload to own weight ratio in its class. The small-size loader offers reduced dilution, better flexibility and operator safety when working in narrow vein operations. The loader is easy to operate and maintain, and it features an operator's compartment that is located in the rear frame of the machine to ensure increased operator safety. Sandvik LH202 is full of features which help mines maximize tonnes and minimize extraction costs. It has been engineered to optimize machine width, length and turning radius, enabling operation in more narrow tunnels and for lower operational costs. The equipment is appreciated for its low fuel consumption, and it can be equipped with a Euro Stage IV / Tier 4 F low-emission engine from Deutz, which makes it compliant for markets with stringent emission requirements, including Europe. In addition to mining applications, the compact and agile equipment fits well for civil engineering and construction projects for building new and improving existing infrastructure. Due to its relatively light weight and the possibility to disassemble the equipment for transport, Sandvik LH202 is a fit match for small-dimensioned construction sites, even if located in remote areas within challenging access. SPEEDS FORWARD & REVERSE (LEVEL/LOADED) WITH DEUTZ BF4L914 1st gear 10 km/h BUCKET MOTION TIMES Sandvik LH202 loader is a fit pair with the development drill rig Sandvik DD210 and the long-hole jumbo Sandvik DL210. OPERATING WEIGHTS Total operating weight 8 800 kg LOADED WEIGHTS Total loaded weight 11 800 kg

OPERATIONAL CONDITIONS AND LIMITS Environmental temperature From -20° C to +48° C Standard operating altitude Below 4500 m Front axle Kessler D41, SAHR brakes, Limited slip differential Rear axle Kessler D41, SAHR brakes, No slip differential, oscillating REQUIREMENTS AND COMPLIANCE Compliance with 2006/95/EC Low voltage directive Compliance with 2004/108/EC Electromagnetic compatibility directive Compliance with 2006/42/EC Machinery directive (Equipment for EU area, achieved with relevant options) Design based on EN 1889-1. Machines for underground mines. Mobile machines working...

BUCKET HYDRAULICS DASHBOARD AND DISPLAYS Critical warnings and alarms Displayed as warning lights Instrument Panel Electric gauges Instrument Panel Illuminated switches FRAME REARAND FRONT FRAME High strength welded steel structure with optimized material thicknesses Central hinge Adjustable upper bearing Tanks Bolted Automatic central lubrication Option The oil flow from steering Joystick bucket and boom control hydraulic pump is directed to (hydraulic), equipped with gear bucket hydraulics when steering pump that delivers oil to the is not used. bucket hydraulic main valve. Boom system...

INCLUDED SAFETY FEATURESFIRE SAFETY Portable fire extinguisher Hot side - cold side design Isolation of combustibles and ignition sources Heat insulation on exhaust manifold, turbo, and isolated exhaust pipe ENERGY ISOLATION Lockable main switch, ground level access SAFETY OPTIONS Radio remote control interface HBC, analoque Radio remote control HBC, analoque Recovery kit (brake release by radio signal) hook included Lower canoby (2017 mm) Driving direction lights (red / green) Emergency steering Fire suppression system ANSUL, 1 tank, 6 nozzles (CE), including auto shutdown Fire suppression...

L9 (mm) L10 (mm) H1 (mm), open cabin, STD H1 (mm), open cabin, Low H2 (mm) H3 (mm) H4 (mm) H5 (mm) H6 (mm) H7 (mm) H8 (mm) H9 (mm) H10 (mm) H11 (mm) W1 (mm) W2 (mm) W3 (mm) A1 A2 R1, left turn (mm) R2, left turn (mm) T, left turn (mm) R1, right turn (mm) R2, right turn (mm) T, right turn (mm) Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.