NC-Transfer Type Series TGV/THGV200 • Automatic punching presses up to 2000 mm bolster length • C-frame presses • High-speed presses up to 200 1/min • For one- or two-sided attachment • As 2D or 3D version • Retrofitting on all types of presses possible Operating Modes • Safe setup mode • Test mode • Automatic mode 45-step parts control 32-step cam control Gripper rail couplings Control for active grippers Technical Data Transfer size Feed path Gripper path Lifting path Grippers&Parts weight Gripper rails distance Stroke rate* * stroke rates are standard values and depends on moving passes, paths and movement angles. Maximum throughput up to 200 SPM due to o direct drives of all transfer axes o stroke optimization software o for all axis monitored position synchronisation High availability due to o electrical overload protection for all axes o absolute encoders for all axis o emergency opening of the gripper rails in case of power failure High transport quality due to o optimized positioning using springloaded grippers o compact design Very flexibl in use due to o freely programmable movements o „recipe“-memory Low maintenance due to o encapsulated drive