NC-Transfer DSTG Series (patented) Especially suited for forging operations For bolster lengths up to 5500 mm Gripper rail profiles up to 200 mm x 200 mm Operates as 2D or 3D version For use as one or two-sided version Can be retro-fitted on all types of presses Operating Modes • • • • Safe setup mode Test mode Automatic mode Controlled single stroke 45-step parts control 32-step cam control Fully automatic gripper rail couplings Loading station for solid forming Blank cut with exchangeable cassette Gripper holders for solid forming Gripper fingers for sheet metal forming High transport quality due to o minimal deflection through double crank drive o optimized positioning using springloaded grippers High availability due to o mechanical overload coupling and overcurrent protection for all axes o absolute encoder for all axis Maximum throughput due to o stroke optimization software o monitored position synchronisation Short set-up times due to o automatic tool change o free access for conveyor systems, blank loaders, conveyer belts Very flexible use due to o freely programmable movements o „recipe “-memory for different tools Low maintenance due to o fully encapsulated drive units o automatic central lubrication Technical Data Transfer Size Feed path Gripper path Lifting path Grippers & Part weight Closing force/Rail Gripper rail distance Stroke rate* *The stroke rates shown are standard values and de