Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Sander Automation
  3. Hydraulic Gripper Rail Coupling HK 100 Series

Hydraulic Gripper Rail Coupling HK 100 Series

Hydraulic Gripper Rail Coupling HK 100 Series
1 / 1 PageView full catalog

Hydraulic Gripper Rail Coupling HK 100 Series

Product catalog summary
Application
• Suitable for all punching and stamping presses, as well as sheet metal and forging operations.
Advantages
• Minimal setup times due to:
  • Automatic tool change
  • Electrically monitored connection status
  • Integrated pneumatic and electrical bus connections
  • From 8 mm lifting stroke (vertical)
  • Highest repeatability
• Optimal flexibility due to:
  • Freely programmable pick-up and drop-off paths
  • No interfering contours on the gripper rail
• High transport quality due to:
  • Low weight
  • High stiffness
Hydraulic Gripper Rail Coupling - HK 100 Series
Profile Coupling 100 x 100 mm
Electrical Interface
  • Communication: 4 contacts
  • Current per contact: 10 A
  • Voltage per contact: 24 V
Pneumatic Interface
  • Cross-section: 50.25 mm²
  • Operating pressure: 10 bar
Mechanical Characteristics
  • Transmitting torques: 3000 Nm
  • Tractive power: 25 kN
Physical Characteristics
  • Installation space: 100x91.5x100 mm
  • Weight per pair: 4 kg
Technical Data
See more

Catalog excerpts

Hydraulic Gripper Rail Coupling HK 100 Series-1

INNOVATION...IN MOTION Application • for all punching & stamping presses • for sheet metal and forging operations Advantages • Minimal setup times due to o automatic tool change o electrically monitored connection status o integrated pneumatic and electrical bus connections o from 8 mm lifting stroke (vertical) o highest repeatability • Optimal flexibility due to o freely programmable pick-up and drop off paths o no interfering contours on the gripper rail • High transport quality due to o low weight o high stiffness Sander Automation GmbH Reiersbacher Str. 34 77871 Renchen-Ulm, Deutschland info@sa nderautomation.de www.sanderautomation.de Sander Automation Corporation 501 Wellham Road, Unit #7 Barrie, Ontario, L4N 8Z6, Canada [email protected] www.sanderautomation.com

 Open the catalog to page 1

All Sander Automation catalogs and technical brochures

  1. Counting Conveyor 12/13
    Counting Conveyor 12/13

    1  Page

  2. Loading Station Type ZSL 45 - NC
    Loading Station Type ZSL 45 - NC

    1  Page

  3. Universal ZIG-ZAG Blanking Station
    Universal ZIG-ZAG Blanking Station

    1  Page

  4. NC-Blank Loader with Load Carriers
    NC-Blank Loader with Load Carriers

    1  Page

  5. NC-Transfer Type HST (patented)
    NC-Transfer Type HST (patented)

    1  Page

  6. NC-Transfer Type Series TGV/THGV200
    NC-Transfer Type Series TGV/THGV200

    1  Page

  7. NC-Transfer DSTG Series (patented)
    NC-Transfer DSTG Series (patented)

    1  Page

  8. NC-Transfer NGT Series – Industry 4.0
    NC-Transfer NGT Series – Industry 4.0

    1  Page

Archived catalogs

  1. NC-Transfer ZHGV series (patented)
    NC-Transfer ZHGV series (patented)

    1  Page

  2. Software Stroke Rate Optimization and Simulation
    Software Stroke Rate Optimization and Simulation

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.