Automatic Centrifugal Cleaning of Coolants, Oils and other Industrial Fluids without the use of filter media Turbo Centrifuge Series T40/T60

Turbo Centrifuges T40 / T60 Automatic Solids Discharge Machines with sludge Capacities to 6 gph Operation: Dirty liquid 1) enters the dirty fluid tank 2) of the cleaning unit. The feed pump 3) delivers the liquid into the centrifuge rotor 4). The centrifugal force causes the solids to be spun out on the rotor’s wall. The clean liquid exits the rotor via a skimmer tube 5) under pressure. The pressure usually is sufficient to transport the liquid into a clean fluid tank 7). The automatic sludge discharge is controlled via a timer. During the sludge discharge cycle the machine tool need not be stopped....

Fully automatic grinding oil cleaning - Separating steel and grinding abrasives from oil at gear grinding machine (full flow filtration) With immersion chiller for a constant oil temperature With magnetic prefilter to reduce sludge volume Separate cooling circles for machine’s spindle and hydraulic oil Optional air cleaner to eliminate oil mist Variable frequency driven supply pumps Compact design Coolant treatment for ceramic and glass applications - Separating particles from glass and ceramic grinding Full flow or side-stream filtration Automatic sludge discharge through central sludge drop...

Coolants, Oils, Industrial Fluids Filtration with Turbo-Separator Centrifuges and Filter Systems Technical Data - PLC controls - Variable Frequency Drive - Fault Sensors Rotor Capacity: Motor HP Sludge Capacity: Rotor speed: Processing capacity: - Accelaration : min.- max. 950-1300 g 950-1300 - pH Range : Standard Aluminum Rotor : 6.5 — 9.0, Stainless Steel Rotor : 4.0- 14.0 - Operating Temp Max: 180 deg F Configuration: Free Standing Dimensions (in) (LxWxH): = 47x32x102 Inflow height min (in): 51 Clean Fluid Tank (gals): Not Applicable Dirty Collection Tank (gals): Not Applicable Connection...